BASSBOSS Active Line-array PA SET

Producător: BASSBOSS
Cod produs: BASSBOSS Active Line-array PA SET
Disponibilitate: pre-comanda
331.200,00 RON TVA inclus
Pret: 71.771,04€
VAT Incl.


BASSBOSS Active Line-array PA SET nu este un sistem de sonorizare, este o bestie de 40000 W. Pentru orice club cu pretentii, sonorizari in aer liber, sali mari de evenimente, etc,  acest sistem va impresiona in primul rand prin forta si claritate. Conceput si realizat integral in USA de redutabila firma BASSBOSS, sistemul este senzational atat ca sound, cat si calitativ. Se importa numai la comanda, plata integral anticipat, are garantie 3 ani si poate fi livrat in doua saptamani. Sistemul se compune din 8 module line-array LA88, fiecare de cate 3000W si 4 subwoofere duble de 18" ZV28, fiecare de 4000 W. Pretul exprimat este pentru tot sistemul. Optional, anumite accesorii pot fi comandate tot prin intermediul magazinului nostru ca reprezentant al producatorului american in Romania. Produse recomandate de

Detalii tehnice:

LA88 Line Array




Loudspeaker Description

Small format Dual 8 in. Line Array

Frequency Response (±3 dB)

50 – 19,000 Hz (Full-Range) 100-19,000 Hz (Satellite Mode)

Maximum Sustained Output

129 dB

Nominal Dispersion (°H x °V)

140 x 8



3000 W – Two-Channel Powersoft Class D Digital Amplifier


Integrated comprehensive DSP provides high pass, low pass, equalization, phase alignment and limiting

Electrical Connectors

Neutrik Powercon in and through

Voltage Operating Range

90-250V. Auto-sensing, auto switching universal supply

Current Draw, Nominal

3A @ 1/8 power

Signal Input Connector


Signal Output Connector

XLR-M pass-through only


Enclosure Type

2-way line array. Vented LF section with multi-aperture midrange loading, horn-loaded HF section


LF: Two 8 in. dia (200 mm) neodymium motor woofers with 2 in. (51mm) copper winding voice coil. HF: Two 1.7 in. (44mm) diaphragm compression driver on 1 in. throat isophasic wave guides

Cabinet Construction

15mm Baltic Birch plywood. Integrated cabinet handles


Integrated aluminum line array flyware, adjustable in one degree increments, with fixed front pivot point

Dimensions (HxWxD)

24 in. wide x 19 in. deep x 9.5 in. tall (front); 7 in. tall (back) without flyware; 26.25 in. wide x 11 in. tall (front) x 7 in. tall (back) x 19 in. deep with flyware

Net Weight

55 lbs

Shipping Weight

65 lbs

Exterior Finish

Weatherproof bonded high-pressure polyurethane


Diffraction aperture cut aluminum fascia


Array Frame (Bumper Bar)

Support frame Light for up to twelve cabinets or Heavy for up to twenty four cabinets


Heavy-duty clam-shell hard case

Wheel Dolly

Multibox rolling cart/ground support bracket


ZV28 Profundo Powered Subwoofer




Loudspeaker Description

Extended Low-Frequency Dual 18 Inch Powered Subwoofer

Frequency Response (+-3 dB)

24 – 90 Hz

Frequency Response, Pair (+-3 dB)

21 – 90 Hz

Maximum Sustained Output

134 dB SPL, 1 meter, half-space (ground plane)

Nominal Dispersion (H° x V°)

360 x 360 – Cardioid Mode Available with Multiple Boxes



4000 Watt Continuous RMS Class D Subwoofer Amplifier


Integrated comprehensive DSP provides high pass, low pass, phase alignment and limiting

Electrical Connectors, Amplifier

Neutrik powerCON Input (Blue) NAC3FCA, Neutrik powerCON Through (Grey) NAC3FCA

Electrical Connector, Mains

Standard US 3-pin 120V electrical plug: NEMA 5-15 (Edison), Optional electrical plugs available, including L5-30 and others, upon request.

Voltage Operating Range

90-132VAC, 55-65Hz

Current Draw, Nominal

564 W, 4.7A @ 120 Volts (typical, 1/8 max power)

Signal Input Connector


Signal Output Connector

XLR-M (pass-through only)


Enclosure Type

Direct radiating, vented enclosure, optimally tuned for extremely low frequency response with good sensitivity and high power handling


2 x 18 in. diameter (457 mm) neodymium motor woofer with 4.5 in. (115 mm) copper winding voice coil and 56 mm (2.2″) peak to peak excursion. Waterproof fiber composite cone

Cabinet Construction

18 mm Baltic Birch plywood, extensively braced. Equipped with 16 flypoints, 8 steel handles, 2 pole sockets, 4 large rubber feet, and 4 interlocking foot pockets

Dimensions (HxWxD)

22.5 in. x 42 in. x 42 in. (23.25 in. high with feet)

Net Weight

225 lbs

Shipping Weight

240 lbs

Exterior Finish

Rugged, weatherproof, black textured, bonded high-pressure polyurethane coating


Perforated, powder-coated steel

Pole Sockets

2 (35 mm)


8 Steel Handles


Flying Hardware

Side-pull anchors and/or shoulder eyebolts

Suspension System

16 x 3/8 in.-16tpi threaded flypoints

Amplification for Installation

Complete power package including DSP in two space rack chassis for permanent installations

Installation Version

Available without handles and pole sockets

Transport Dollies

Dolly cart with 4 locking casters and recesses to accept interlocking cabinet feet for transporting 1 to 3 cabinets


Heavy-duty padded nylon transport covers for 1 or 2 cabinets


Opinii (0)

Spune-ţi opinia

Numele tău:
Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: