Crown Power Amp Rack SET 12400W

Crown Power Amp Rack SET 12400W

Producător: Crown
Cod produs: Crown Power Amp Rack SET 12400W
Disponibilitate: disponibil in 8-10 zile
48.000,00 RON TVA inclus
Pret: 9.936,00€
VAT Incl.

Descriere

Crown Power Amp Rack SET 12400W reprezinta o solutie excelenta de amplificare pentru configuratii diferite ale speakerelor, atat in cazul sistemelor pasive line-array, cat si point source, sau standard. Gratie procesorului de sistem DBX Driverack 260 care are 6 iesiri, cele trei amplificatoare Crown vor beneficia de o distributie extrem de flexibila inca de la intrarea semnalului care va fi pre-cossoverat, tratat EQ, cu compresiile, subarmonicele si limitarile aferente, pre-amplificarea gata configurata functie de speakerele detinute si felul aplicatiei. Amplificatoarele Crown fiind controlate DSP vor avea in acest mod randament maxim, cu precizie sporita destinatiei: top/sub. Puterea impresionanta detinuta de acest rack de 12400W va livra chiar in fortaj un minim de distorsiuni, speakerele fiind protejate in cascada atat de procesorul dbx, cat si de DSP-ul intern fiecarui amplificator. Reglajele AFB-ululi, delay-ului, precum si celelalte setari se vor face in functie de configuratia speakerelor si suburilor. Multieffect procesorul Lexicon MX 400XL va contura cu superbele efecte detinute intreaga sonorizare, trimiterile fiind facute din AUX 1-4 ale mixerului independent pe fiecare canal, intoarcerea in mixaj putand fi facuta si pe canale dedicate, ceea ce ar spori acuratetea procesarii (ca la carte). In concluzie, un rack foarte eficient, cu functionalitate complexa, ideal pentru sonorizari medii-mari, fiabil si cu o calitate fara compromis. La cererea clientului, acest rack poate fi custumizat si cu alte componente de sistem, in functie de destinatie si aplicatie. In configuratia prezentata, pretul exprimate este pentru intreg sistemul care se aduce numai cu pre-comanda, plata anticipat, iar livrarea se poate face in 8 zile. Rack-ul dvs beneficiaza de o garantie de 3 ani, pentru fiecare component in parte si este configurat astfel:

1 x Crown Xti 6002, DSP control amplifier, 19" 2 U, 2x 3000 W (2 Ohms), 2100 W (4 Ohms), 1200 W (8 Ohms), 4200 W Bridge 8 Ohms, 6000 Watt Bridge 4 Ohms, DSP-Control: Input EQ with 6 parametric Filters per channel with adjustable Q-Shelf and +/- 15 dB Gain, Crossover with High- and Lowpass, per channel with 6/12/18/24 dB per Octave and switchable polarity, Output EQ witg 8 parametric Filters per channel with adjustable Q-Faktor and +/- 15 dB Gain, Delay up to 50 ms, Subharmonic Synth, Peak Plus Limiter with adjustable Threshold, Attack and Release, 50 Presets, 3 mode switchable cooling fan, HiQnet Band Manager and System Artchitect Softwarecontrol by USB-Port Type B, display with temperature of powersupply and voltage, 2x NL 4 Speaker Twist out, Binding Post out, XLR in/out, dimensions: 19" (485mm) x 2 U (89mm) x 420 mm, weight 10,9 Kg

2 x Crown Xti 4002

Power Amplifier

  • DSP controlled
  • Power: 2x 1600 W (2 ohm), 1200 W (4 ohm), 650 W (8 ohm), 2400 W bridge (8 ohm), 3200 W bridge (4 ohm)
  • DSP Applications: input EQ with 6 parametric filters per channel with adjustable Q- factor and +/- 15 dB gain
  • Crossover with high and low pass
  • Each channel with 6/ 12/ 18/ 24 dB per octave and switchable polarity
  • Output EQ with 8 parametric filters thomann per channel with adjustable Q- factor and +/- 15 dB gain
  • Delay up to 50 ms
  • Subharmonic synth
  • Peak plus limiter with adjustable threshold, attack and release
  • 50 Presets
  • 3 Switchable fan-mode controls
  • HiQnet band manager and system architect control software via USB port
  • Display for the mains voltage and power supply temperature
  • Connectors: 2x NL4 speaker twist out, binding post out, XLR in/ out
  • Dimensions: 19” (485 mm) x 2 U (89 mm) x 311 mm
  • Weight 8.4 Kg

1 x Stairville PD-332 Power Distributor 32A CEE, Tri-Phase Power Distributor. Professional made with digital, Volt- & Amp-Meter. Power Input: 1x 32A CEE, Power Output: 6x 16A EU socket, 1x 32A CEE socket, Protection circuit breaker on each phase, Additional circuit breaker for residual current Fi 32A 4 pole 0.03A,, Digital Voltage Meter and Amp-Meter for each phase on the front side. Made for 19" rack installations., Dimensions: 482 x 134 x 257 mm (LxHxW), Weight: 8,2 kg

1 x DBX Driverack 260 digital speaker management system - the same features as DriveRack PA (order code 155975) plus: muting option (no switch noise), RS232 connection with driver software for remote for all functions, delay line (up to 2.7sec), update option, freely configurable input and output routing, assignable output names, zone controller function via RJ-45 connection, feedback eliminator (2x 12 filters), 2 virtual inserts with various effects (e.g. subharmonic synthesizer), RTA display always accessible on front panel and software, 110dB dynamic range.

1 x Multi-EffectThe LEXICON MX400XL integrates two separate effects units in a 1U, 19 inch unit. The four separate inputs and outputs can be used with analogue (XLR) or digital S / PDIF signals.

  • 17 legendary Lexicon Hall algorithms (e.g., halls, chambers, plates, ...)
  • Lexicon Delay & Modulation effects
  • Dbx dynamic algorithms
  • Quad processor design
  • VST plug-in architecture via USB interface
  • Seven routing configurations
  • Two digital S / PDIF interfaces
  • Analog 24-bit inputs and outputs
  • 99 factory and 99 user programs for stereo and dual stereo
  • 25 factory settings and 25 user programs for surround
  • Graphic LCD display
  • MIDI interface
  • XLR In / Outputs
  • Dimensions 19" rack format with 1U
  • Weight: 2.6 kg

1 x Hard case dedicat cu dolly

1 x set Patch cabluri XLR-XLR inclus

Asistenta tehnica la configurare oferita gratuit de tehnicienii nostri.

Opinii (0)

Spune-ţi opinia

Numele tău:
Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: