Peavey IPR2 7500 DSP SET

Producător: Peavey
Cod produs: Peavey IPR2 7500 DSP SET
Disponibilitate: disponibil in 8-10 zile

13.824,00 RON TVA inclus

Pret: 2.709,50€
VAT Incl.

Descriere
Opinii (0)

Descriere

Peavey IPR2 7500 DSP SET se compune din doua amplificatoare Peavey IPR-2 7500 DSP avand fiecare 3750W RMS @4Ohm. Odata cu achizitionarea acestora stage-prolighting va ofera rack-ul 4U cadou!!! Importul este facut din SUA, 3 ani garantie!!!

Detalii tehnice:

The IPR-2 7500 DSP Power Amp boasts 3,750 watts RMS per channel at 4 ohms. Featuring 2 channel independent fourth order Linkwitz-Riley crossovers, a variable-speed fan housed in a lightweight aluminum chassis, DDT speaker protection, and the revolutionary new IPR-2 class D topology.

Features:

3750W RMS x 2 at 2 ohms
2020W RMS x 2 at 4 ohms
1250W RMS x 2 at 8 ohms
3850W RMS x 1 at 2 ohms
2400W RMS x 1 at 4 ohms
1330W RMS x 1 at 8 ohms
Revolutionary IPR class D topology
Detented input controls
Combination XLR 1/4" inputs
Combination 1/4" or 1/4" 4 pole twist lock output connector
DDT™ protection
Individual signal pass-thru 1/4" jacks on each channel
Light weight
LED illuminated
DSP-based Loudspeaker Management System
120 ms of delay per channel
4 bands of parametric equalization per channel
Security lock
Adjustable fourth-order Linkwitz-Riley Crossover
Adjustable fourth-order high-pass filter each channel
Setup wizard
MAXX Bass®
Horn EQ each channel
Blue, backlit LCD screen
Weight Unpacked: 14.57 lb(6.61 kg)
Weight Packed: 18.39 lb(8.34 kg)
Width Packed: 21"(53.34 cm)
Height Packed: 21.2"(53.848 cm)
Depth Packed: 6"(15.24 cm)

Specifications:

Rated Watts: 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz.
Rated Watts: 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz.
Rated Watts: 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz.
Minimum Impedance: 2 ohms
Maximum RMS Voltage Swing: 124 volts
Frequency Response: 20Hz - 25kHz; +0dB, -3dB
20Hz - 20kHz 2ch x 2 ohms: <0.5% @ 3280 watts 20Hz to 4kHz, decreasing to 3000 watts @ 20kHz, both channels driven.
20Hz - 20kHz 2ch x 4 ohms: <0.15% @ 2000 watts 20Hz to 20kHz, both channels driven.
20Hz - 20kHz 2ch x 8 ohms: <0.15% @ 1200 watts 20Hz to 20kHz, both channels driven.
Input CMRR: > - 75dB @ 1 kHz.
Voltage Gain: x 70 (+37 dB)
Crossover: Adjustable High Pass and Low Pass filter per channel. Filter Types: 12dB/oct 2nd order, 18dB/oct 3rd
order, 24dB/oct 4th order Butterworth and 24dB/oct 4th order Linkwitz –Riley
Crosstalk: > -60dB @ 1kHz @ 1000 watts power @ 8 ohms.
Hum and Noise: > -95dB, “A” weighted referenced to rated power @ 4 ohms.
Slew Rate: > 12V/µs
Damping Factor (8 ohms): > 200:1 @ 20Hz - 1kHz @ 8 ohms
Input Sensitivity: 1.290 volts +/- 3% for 1 kHz 4 ohm rated power, 1.240 volts +/- 3% for 1 kHz 2 ohm rated power
Input Impedance: 12 kilohms, balanced and 10 kilohms unbalanced.
Current Draw @ 1/8 in VA (watts): 2210 (1440) @ 2 ohms, 1550 (950) @ 4 ohms, 982 (560) @ 8 ohms
Current Draw @ 1/3 in VA (watts): 4260 (3150) @ 2 ohms, 3120 (2160) @ 4 ohms, 1890 (1200) @ 8 ohms
Idle Consumption: 250VA, 120 watts.
Cooling: 3 temperature dependent variable speed fans.
Controls: 2 front panel detented attenuators, push-button navigation encoder to navigate through the menus on the LCD screen for input mode, parametric EQ, crossover H.P.F, Normal, L.P.F. and more.
Indicator LEDs: Five LED indicators per channel: Active, Signal, DDT, Temperature and DC
Protection: Thermal, DC, subsonic, incorrect loads, under and over voltage
Connectors:
- Inputs: Dual combination 1/4” XLR
- Outputs: Dual male XLR input thru, one 2-pin & one 4 pin twist-lock connectors
Construction: 0.062” thick aluminum
Dimensions: 3.5”x19”x 17” behind front panel + 0.6” for handle
Net Weight: 6.61kg (14.6lbs.*)
Gross Weight: 8.34kg (18.4lbs.)