d&b Expandable HQ line-array PA SET
Cod produs: d&b Expandable HQ line-array PA SET
Disponibilitate: indisponibil momentan
VAT Incl.
Descriere
d&b Expandable HQ line-array PA SET este format din produse de top de la d&b Audiotechnik, fiind produs si importat din Germania, 3 ani garantie!!! Sistemul se aduce numai cu pre-comanda. Pentru detalii legate de pret, modalitatea si termenul de livrare, va rugam sunati la magazin. La aceste produse asistenta tehnica, configurarea si instructajul de baza privind utilizarea va sunt oferite gratuit de tehnicienii nostri. Sistemul dvs in aceasta configuratie (de baza - perfect upgradabila) se compune din:
Component | Nr Buc | Descriere sumara |
Vi subwoofer |
2 | Subwoofer 133 dB, 18" driver + 12" driver, 800W RMS/3200W in peack, 37-115 Hz |
Vi-GSUB subwoofer |
2 | Subwoofer 133 dB, 18" driver + 12" driver, 800W RMS/3200W in peack, 37-115 Hz, fara suspendare, grounded. |
Vi10P loudspeaker |
2 | 2 x 10" LF driver with neodymium magnet 1 x 8" MF driver with neodymium magnet 1 x 1.4” exit compression driver Passive crossover network, 136 dB cu D20, 8Ohm, max 2 buc/ch, 500/2000 W |
Vi12 loudspeaker |
4 | 2 x 10" driver / 1 x 8" driver 2 x 1.4" exit compression driver passive crossover network, 8 Ohm, max 2 pcs/ch, 139 dB cu D20, 500/2000 W |
D20 amplifier |
2 | amplificator 4-ch, 4 x 1000 W, procesorDSP de sistem incorporat cu toate functiile, afisaj digital, touch screen |
Rigging components | SET | Componente de prindere dedicate |
Patch cables 4-pole | SET | Cablajul complet speakon 4-pole |
Detalii Tehnice:
Vi subwoofer
The installation specific Vi-SUB is an actively driven high performance cardioid subwoofer powered by a single amplifier channel. The Vi-SUB features integrated rigging equipment. It shares the same acoustical and visual design as the Vi-GSUB, which is intended for ground stacked applications only. It houses two long excursion neodymium drivers, an 18" driver in a bass-reflex design facing to the front and a 12” driver in a two chamber bandpass design radiating to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system that reduces the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction. The Vi subwoofer can be used to supplement Vi8 and Vi12 loudspeakers in various combinations, ground stacked or flown, either integrated on top of a Vi8 / Vi12 array or as a separate column. The Vi-SUB cabinet is constructed from marine plywood and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam.
Data
System data |
|
||
---|---|---|---|
Frequency response (–5 dB standard) |
37 - 115 Hz |
||
Frequency response (-5 dB 100 Hz mode) |
37 - 95 Hz |
||
Max. sound pressure (1m, free field)1 |
133 dB |
||
Cabinets per amplifier channel |
2 |
||
Loudspeaker data |
|
||
Configuration |
Installation specific high performance flyable cardioid subwoofer |
||
Nominal impedance |
8 Ω |
||
Power handling capacity (RMS/peak 10 ms) |
800/3200 W |
||
Splay angle settings |
0° and 2.5° |
||
Components |
1 x 18" driver |
||
Connections |
2 x NL4 |
||
Dimensions, weight |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions (H x W x D) |
606 x 700 x 728 mm |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Weight |
62 kg Vi10P loudspeakerThe installation specific 3-way passive Vi10P loudspeaker features two 10“ drivers in a dipole arrangement with a horn loaded 8“ MF driver and a 1.4“ compression driver mounted onto a rotatable CD horn. The innovative horn design for the centrally mounted 8“ MF driver produces a remarkable sensitivity resulting in an exceptional performance in the vocal range. An advanced bass-reflex and venting design delivers an extended LF output with full bandwidth capabilities. All components are arranged symmetrically around the centre axis of the cabinet to produce a perfect symmetrical dispersion pattern. Due to the dipolar arrangement of the LF drivers, broadband dispersion control is maintained down to approximately 350 Hz in the same plane as the dipole. This point source, high performance loudspeaker offers 110° horizontal directivity matched with a vertical dispersion of 40°; the horn can be rotated by 90° to enable horizontal orientation. The Vi10P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the V-Series, either ground stacked or flown. The loudspeaker cabinet is constructed from marine plywood, and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. M10 threaded inserts are provided for attaching d&b rigging hardware. Data
D20 amplifierThe 2 RU four channel D20 amplifier is ideally suited to mobile and installation applications which require low to medium Sound Pressure Level (SPL) capabilities. The D20 features the same Digital Signal Processing (DSP) platform as the latest generation of d&b amplifiers, containing configurations for all d&b loudspeakers except the J-Series and the M2 monitor, plus a linear mode. The signal delay capability enables user definable settings of up to 10 s (= 3440 m/11286 ft), which can be applied independently to each channel. The same applies to the two 16-band equalizers, providing optional parametric, asymmetric, shelving or notch filtering. The D20 incorporates a colour TFT touchscreen, offering quick access to the menu structure, while the rotary encoder can be used for fine adjustment. The front panel and the integrated touchscreen are tilted up for easy operation when the amplifier is below eye level. The equal ratio of signal input to amplifier output channels increases application flexibility particularly for monitor, frontfill or effect channel use. The LoadMatch function integrated within the D20 amplifier electrically compensates for the properties of loudspeaker cable used. The D20 incorporates Class D amplifiers utilizing a power supply with active Power Factor Correction (PFC) suitable for mains voltages 100 V - 240 V, 50 - 60 Hz and maintains a stable output when used with weak or unstable mains supplies. An NL8 provides all outputs on a single connector for loudspeaker multicores. Dual channel mode is driven through four individual NL4 connectors, while Mix TOP/SUB and 2-Way Active mode output configurations for applicable d&b loudspeakers are available via two central NL4 connectors. etherCON and RJ 45 connectors enable access to the d&b Remote network through OCA via Ethernet and through CAN-Bus respectively. Data
Vi-GSUB subwooferThe installation specific Vi-GSUB is an actively driven high performance cardioid subwoofer powered by a single amplifier channel. The Vi-GSUB is intended for ground stacked applications only. It shares the same acoustical and visual design as the Vi-SUB, which features integrated rigging equipment. It houses two long excursion neodymium drivers, an 18“ driver in a bass-reflex design facing to the front and a 12“ driver in a two chamber bandpass design radiating to the rear. The cardioid dispersion pattern resulting from this arrangement avoids unwanted energy behind the system that reduces the excitation of the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction. The cabinet is constructed from marine plywood and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam.
|
Vi12 loudspeaker
The Vi12 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8"MF driver and two 1.4" exit HF compression drivers with 2.5"voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 120° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz. The mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers. It can be used in columns of purely Vi12 loudspeakers or combined with Vi8s and / or with Vi-SUBs. The cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle while two additional recessed grips are provided at the rear bottom of the cabinet.
Data
System data |
|
||
---|---|---|---|
Frequency response (–5 dB standard) |
67 Hz - 18 kHz |
||
Frequency response (–5 dB CUT mode) |
100 Hz - 18 kHz |
||
Max. sound pressure (1m, free field)1 |
139 dB |
||
Cabinets per amplifier channel |
2 |
||
Loudspeaker data |
|
||
Configuration |
Installation specific high performance 3-way passive line array loudspeaker |
||
Nominal impedance |
8 Ω |
||
Power handling capacity (RMS/peak 10 ms) |
500/2000 W |
||
Nominal dispersion angle (horizontal) |
120° 13 |
||
Splay angle settings |
0° - 14° (1° increment) |
||
Components |
2 x 10" driver / 1 x 8" driver |
||
Connections |
2 x NL4 |
||
Dimensions, weight |
|
---|---|
Dimensions (H x W x D) |
310 x 700 x 460 mm |
Weight |
34 kg |
Opinii (0)
Spune-ţi opinia
Numele tău:Opinia ta: Notă: Codul HTML este citit ca şi text!
Nota: Rău Bun
Introduceţi codul din imagine: