Audiocenter K-LA-212SDP-K-LA218DSP-V-HLA SET

Audiocenter K-LA-212SDP-K-LA218DSP-V-HLA SET

Producător: AudioCenter
Cod produs: Audiocenter K-LA-212SDP-K-LA218DSP-V-HLA SET
Disponibilitate: disponibil in 8-10 zile
122.976,00 RON TVA inclus
Pret: 24.103,29€
VAT Incl.

Descriere

Audiocenter-K-LA-212SDP-K-LA218DSP-V-HLA SET este un sitem de sonorizare foarte bine echilibrat in banda de frecvente 30-20000Hz, calitativ excelent, cu o putere nominala de 20300 W RMS, la un SPL maxim mediu de 141dB, perfect pentru aplicatii LIVE cu pana la 1500 de participanti, atat indoor, cat si Outdoor. Sistemul este auto-amplificat exceptand side-fill-urile pasive care vor fi amplificate de mixerul Powermate 1000-3. Sistemul este la cheie, si se compune din:

4 pcs K-LA218 DSP, 2 x 18" active subwoofer

4 pcs K-LA-212DSP, module line-array 2 x 12"+ 1,4", active

3 pcs V-HLA, arays, 12"+1,4", active

2 pcs EP5152, side-fills/monitors 2 x15" + 1,4", pasive

2 pcs rigging/stand frame pentru arrays

2 pcs trepiede boxe

1 pcs mixer Dynacord PowerMate 1000-3

Un set complet de cabluri si multicore

Sistemul are o garantie de 3 ani, se importa numai cu pre-comanda, plata integral anticipat, poate fi achizitionat si cu fonduri Europene.

Detalii tehnice:

V-HLA12 MKII

Product Overview

V-HLA12 MKII, an active crossover line array speaker, is designed to meet the high demand of touring performance, rental and fixed installation with outstanding clarity.

The LF driver is customized FAITAL neodymium 12”driver with 4”voice coil, and the HF driver is customized Beyma neodymium driver with a nitride titanium diaphragm and 2.84”voice coil. Innovative T.A.C. HF horn waveguide technology ensures very clean, clear and dynamic sound performance. The system is with coverage angle ( H°xV°) 30°x 60° ( +25°/-35° dissymmetrical coverage), which makes sure of accurate coverage no matter horizontally or vertically. The OHAC phase technology in LF is to improve the phase response of off-axis, make the MF richer and smooth the join of frequency band. Result is more consistent and much more impressive sound.

The selected neodymium drivers make V-HLA12 MKII lighter, which is good for easy moving and transportation. Russian birch plywood CNC made cabinets can be used as a matrix of up to 16 cabinets.

For different demands and different venues, V-HLA12 MKII can be used very flexibly. Either as flying horizontal arrays, or stacked horizontally, or ground-supported by three-feet sustain frame or coupling bar with 2 boxes cradle, V-HLA12 MKII can meet different demands.

Together with CA450 touring power supply and patch panel, V-HLA12 MKII can be used as “plug & play” system to meet the demands from small to large sound system.

● Innovative T.A.C. HF horn waveguide technology (patented)

● OHAC phase technology

● Customized drivers from Beyma and FAITAL

● HF horn design with DMF composite material

● Optimized and compact CNC made cabinet design with Russian birch plywood

● Comprehensive rigging system

Type

Active crossover line array speaker

Application System

1 cabinet minimum, 16 cabinets maximum per array

Frequency Response (-6dB anechoic chamber)

54Hz-20KHz 

Rated Power(AES standard)

LF: 700W    HF: 70W

LF Maximum SPL

135dB 

HF Maximum SPL

133dB 

Horizontal Coverage Angle(Symmetrical)

30° 

Vertical Coverage Angle(Symmetrical)

60°(+25°/-35°)

LF Driver

Customized FAITAL neodymium 12” driver, 4” voice coil, 700W(AES) 

HF Driver

Customized Beyma neodymium driver, 1.4”exit, 2.84” voice coil , 70W(AES)

Rated Impedance

LF: 8Ω  HF: 8Ω 

2 Way Amplifier

LF: 8Ω(+2, -2)     HF: 8Ω(+1, -1)

Input Connectors

2×NEUTRIK® NLT4MP 

Cabinet Material

Russian birch plywood CNC made 

Cabinet Color

Black is standard and default color.Consult with sales team for the other customized colors

Dimension(W×H×D)

331×700×437mm

Net Weight

29.0Kg 

 

SW218+

Product Overview

SW218+ subwoofer can be used in touring performance and fixed installation such as club, theatre, auditoriums, ball room, touring performance, etc.

SW218+ is built with customized Beyma neodymium 18”LF driver with 4”voice coil, D.F.L. (Dual Frequency Loading) technology and advanced cooling system, which ensures very low power compression and high SPL, increases response speed and decreases inertial offset at the most. SW218 is with down to 30Hz extremely low LF extension and 52mm long excursion for diaphragm.

Tongue and groove CNC made cabinet with Russian birch plywood, open-mold customized ergonomical handles and fillet cabinet design make it easy for handling and installation. The grill is with hexagonal sound-through holes. 

 

● Powerful, deep and dynamic bass

● Customized BEYMA 18”driver

● D.F.L.(Dual Frequency Loading) technology

● Touring grade emery spraying

● 30Hz extremely low LF extension, housing a 52mm long excursion for diaphragm

● A perfect match for all Audiocenter full range speakers

● CNC cabinet made of Russian birch plywood, ergonomical handles

Type

Subwoofer

Rated Power(AES)

2400W

Frequency Response (-6dB anechoic chamber)

30Hz-200Hz

Maximum SPL

141dB 

LF Driver

Customized Beyma neodymium18” driver, 4” voice coil, 1200W(AES) 

Rated Impedance

4Ω(+2, -2) 

Input Connectors

2×NEUTRIK® NLT4MP 

Cabinet Material

Russian birch plywood CNC made 

Cabinet Color

Black is standard and default color.Consult with sales team for the other customized colors

Dimension(W×H×D)

1150×580×750mm

Net Weight

80.0Kg 

 

K-LA212-DSP90 / K-LA212-DSP60

Product Overview

K-LA212-DSP90 / K-LA212-DSP60 is an active DSP-controlled line array speaker. It can be compared to three-way systems for the sound performance, and with more compact size and lighter weight, K-LA212-DSP90 / K-LA212-DSP60 has more advantages for easier handling and transportation. 

The K-LA212-DSP90 / K-LA212-DSP60 incorporates a novel phase corrector, which shifts the center of the speakers closer to the center of the box. This same corrector optimizes the working frequency of the speaker and the waveguides system of the horn, getting a sum of + 6dB on the entire response band of the subwoofer. Create a two-way coaxial system capable of achieving a consistent response across the horizontal plane coverage. It is with high-performance, small size and light weight, which is suitable for both touring performancel and fixed installations.

The HF drivers are two customized Beyma drivers with composite membrane (2.84” voice coil), and the LF drivers are two customized Beyma 12” divers (3” voice coil).

K-LA212-DSP90 / K-LA212-DSP60 system can be used as main PA sound reinforcement with 3 cabinets at least and 16 cabinets maximum per array.

K-LA212-DSP90 / K-LA212-DSP60 can be suspended vertically. The integrated hardware built-in to the cabinet with 12.0mm high intensity pins make installation easy and convenient. The system can be combined in modularization according to the coverage angle of place, which can meet the requirements of different applications. The installation of the system is very flexible and convenient. For those places where the system can not be flown, there are customized frames suitable for both flying and ground stacking (maximum 4 cabinets).

● Customized driver from Beyma

● PTV HF horn ensures even coverage and optimized for smooth frequency response

● Dual phase plug design for an extremely precise dispersion

● Hi end digital controller on board (DSP) with 96KHz signal sampling frequency, 56bit precision

● Standby mode automatically if without signal input for 15mins

● Class D amplifier from PASCAL

● Advanced cooling system in the driver

● Optimized and compact elegant premium design cabinet

● Rock solid humidity free birch plywood CNC made cabinet

● Comprehensive accessories suitable for different applications

Type 

Active DSP-controlled full range loudspeaker

Application

3 cabinets minimum, 16 cabinets maximum per array

Frequency Response(-6dB anechoic chamber)

55Hz-20KHz

Maximum Calculated SPL/1M

135dB

LF/MF Driver

Customized Beyma ferrite driver, 3” voice coil

HF Driver

Customized Beyma Neodymium driver, 1.4” exit, 2.84” voice coil

K-A212-DSP90 Horizontal Coverage Angle(Symmetrical)

90°

K-A212-DSP60 Horizontal Coverage Angle(Symmetrical)

60°

Vertical Coverage Angle(Symmetrical)

Depend on the amount of the speaker and curvature of the line array

AMPLIFIER

Amplifier Circuitry

Class D

Power(RMS standards)

1600W

Frequency Response(1W 8Ω 2ch)

20Hz-20KHz(±0.5dB)

Intermodulation Distortion

<0.05%

Total Harmonic Distortion

<0.05%

Protection

DC protection, short circuit protection, overheat protection, input overload protection, output overload protection, soft startup protection, overvoltage protection, undervoltage protection

Cooling System

Cooling with fans

DSP

Processor

96KHz signal sampling frequency, 56bit precision

Presets

Fixed system presets

Crossover

Controlled by DSP

Output/Input

 

Signal Input

1×NEUTRIK® female XLR

Signal Output 

1×NEUTRIK® male XLR

Power Input

Powercon NAC3MPA

Power Output

NAC3MPB

Working Voltage

85V-265V  50Hz (60Hz)    

Cabinet

Angle Adjustment

0°, 1°, 2°, 3°, 4°, 5°,6°, 7°, 8°, 9°,10°

Cabinet Material

Russian birch plywood CNC made

Cabinet Color

Black is standard and default color.Consult with sales team for the other customized colors

Dimension(W×H×D)

899×344.5×647.5mm

Net Weight

59.0Kg

 

EP5152

Product Overview

EP5152 loudspeaker is with symmetric cabinet design. The color of the cabinet can be customized. On the both sides of the cabinet, there are customized aluminum ergonomic handles to make the carrying and transportation very easy. The rubber mat at the bottom is against sliding. 

EP5152 HF horn is made of DMF composite material to ensure very warm sound. The coverage angle is (H°×V°) 70°×50°. This ensures accurate coverage no matter in vertical or horizontal direction.

Type  

Passive crossover full range speaker

Frequency Response(-6dB anechoic chamber)

35Hz-20KHz

Rated power(AES)

1000W

Maximum Calculated SPL/1M

139dB

Horizontal Coverage Angle (Symmetrical)

70°

Vertical Coverage Angle (Symmetrical)

50°

LF Driver

Customized Audiocenter ferrite driver, 3” voice coil, 500W(AES)

HF Driver

Customized Beyma ferrite driver, 1.4” exit, 2.84” voice coil, 70W(AES)

Crossover Point

1200Hz

Impedance

4Ω(+1, -1)

1 Way Amplifier

1pcs maximum, 4Ω

Hanging Points

M8 screw

Pole Mount

Base hole Φ35mm

Input Connectors

2×NEUTRIK® NL4MP

Cabinet Material

CNC made of excellent wood

Cabinet Color

Black is standard and default color.Consult with sales team for the other customized colors.

Dimension(W×H×D)

446×1175×575mm

Net Weight

52.5Kg 

 

Opinii (0)

Spune-ţi opinia

Numele tău:
Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: