BASSBOSS DV12 Powered Speakers SET

BASSBOSS DV12 Powered Speakers SET

Producător: BASSBOSS
Cod produs: BASSBOSS DV12 Powered Speakers SET
Disponibilitate: pre-comanda
39.480,00 RON TVA inclus
Pret: 7.738,08€
VAT Incl.

Descriere

BASSBOSS DV12 Powered Speakers SET se compune din doua speakere active BASSBOSS DV12. Produsele sunt noi, sigilate, import SUA, se aduc numai cu pre-comanda, plata integral anticipat si au o particularitate iesita din comun: nu au nevoie de subwoofere. Banda de frecvente a acestor speakere este 45-19000Hz, la un SPL maxim de 136dB, avand 600W RMS, dar fiind deservite de cate un amplificator clasa D Powersoft de 3000W fiecare. Incredibil de puternice pentru aceste dimensiuni restranse, aceste boxe active se aud la fel de bine atat de aproape, cat si de la 40m, fiind o alegere excelenta atat pentru aplicatii INDOOR, cat si OUTDOOR. Cu o dispersie excelenta si "long throw" remarcabil, speakerele au nu numai forta, dar si o claritate iesita din comun. Ideale atat pentru DJ, cat si pentru aplicatii LIVE, avand DSP incorporat cu preseturi bine definite.

ACOUSTICAL

Loudspeaker Description

Wide dispersion compact full-range speaker

Frequency Response (±3 dB)

45 – 19,000 Hz

Maximum Sustained Output (Full-Range)

120 dB SPL, 1m, 2pi, half-space

Maximum Sustained Output (Satellite-Mode)

126 dB SPL, 1m, 2pi, half-space

Max SPL (Peak)*

136 dB

Nominal Dispersion (H° x V°)

120 x 20

ELECTRICAL

Amplification

3000 Watt 2 Channel Powersoft Class D Amplifier

Processing

Integrated comprehensive DSP provides high pass, low pass, equalization, phase alignment and limiting

Electrical Connectors, Amplifier

Neutrik powerCON Input (Blue) NAC3FCA, Neutrik powerCON Through (Grey) NAC3FCA

Electrical Connector, Mains

Standard US 3-pin 120V electrical plug: NEMA 5-15 (Edison)

Voltage Operating Range

90-250V. Auto-sensing, auto-switching, PFC universal power supply.

Current Draw, Nominal

600 W, 5A @ 120 volts (typical, 1/8 max power)

Signal Input Connector

XLR-F

Signal Output Connector

XLR-M (pass-through only)

PHYSICAL

Enclosure Type

2-way mid-high. Vented LF section, horn-loaded HF section

Transducer (Low Frequency)

1 x 12 in. diameter (304 mm) neodymium motor woofer with 4 in. (101 mm) aluminum winding voice coil

Transducer (High Frequency)

1 x 2.5″ (64mm) diaphragm compression driver on 1.4 in. throat isophasic wave guide

Cabinet Construction

15 mm multi-ply Poplar core Baltic Birch plywood. Equipped with 2 handles. Includes 4 internally braced fly points and a 35mm pole socket mount

Dimensions (HxWxD)

24.5 in. x 14.5 in. x 17 in.

Net Weight

49 lbs

Shipping Weight

58 lbs

Exterior Finish

Rugged, weatherproof, black textured, bonded high-pressure polyurethane coating

Grill

Perforated, powder-coated steel

Pole Sockets

1 (35 mm)

Handles

2 Integrated Handles

OPTIONAL

Suspension System

8 x 3/8 in.-16tpi threaded flypoints

Flying Hardware

Shoulder Eye Bolts or Side-Pull Anchors

Stacking Bracket

Adjustable bracket set, mounts second cabinet inverted for near-perfect summed response, provides splay-angle adjustment from 0 to 8 degrees

Pole Options

Unthreaded Pole for DV8, DV12, SV8, AT212, AT312

Stand

35mm Pole Stand – Supports loudspeaker above subwoofer equipped with pole socket; Tripod Stand – Supports loudspeaker from ground

Covers

Heavy-duty padded nylon transport covers for 1 cabinet

Opinii (0)

Spune-ţi opinia

Numele tău:
Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: