AudioFocus ARES12i-MTSub218MKII-FR-X12a-CM15a SET

AudioFocus ARES12i-MTSub218MKII-FR-X12a-CM15a SET reprezinta o solutie completa de sonorizare extrem de performanta, cu o calitate exceptionala a sunetului, la un raport calitate/pret mai mult decat rezonabil, avand in vedere performantele tehnice ale sistemului si fiabilitatea produselor. Made in Belgia.

Sistemul dvs se compune din:

 

Component	Nr Buc	Descriere de baza
Audiofocus ARES12i	4	Module line-array 2x12”+8x3”+2x1,4”, 1680W RMS. 143dB, autoamplificat cu Powersoft cu DSP, network
Audiofocus FR-X12aHQ	2	Top horn/array, multifunctional, 1x12”+1,4”, 1700W RMS, 139,5dB,side-fill, autoamplificat cu Powersoft cu DSP, netwk
Audiofocus MTSub218MKIIa	4	Subwoofer autoamplificat cu autoamplificat cu Powersoft cu DSP, network, 2 x18”, 2000W RMS/4000W r.cont, 142dB
Audiofocus CM15a	2	Monitoare autoamplificate cu Powersoft DSP, 15”+1,4” coaxial, 1200W RMS, 140,6 dB, X-Comb/FIR/Network
K&M heavy speaker stands	2	Stative boxe
XLR-XLR cables Patch SET	SET	Cabluri, XLR-XLR Neutrik, set complet pentru tot sistemul

 

CM 15a

• Coaxially constructed
• 2-way self-powered stage monitor
• Adaptive (rotable) AF horn 70x50° and 80x60°
• X-comb technology inside
• Pole mount socket
• Ultra compact wedge with a cut-off of LF

CM 15a is a high-end system designed for stage monitoring and distributed FOH applications. It is a self-powered, 2-way enclosure, that delivers wide bandwidth frequency from 55Hz to 20kHz.

The CM 15a enclosure contains a 1.4’’ compression driver loaded into a coaxial configuration with a 15’’ low frequency transducer. Compact and lightweight, this model produces 80° x 60° directivity pattern.

Made in Baltic birch plywood, CM cabinets have 35° angle wedge from vertical. The CM can also be pole mounted using a tiltable flange of +/- 13.5° with 4.5 steps.

The‘’VERS’’* system permits to rotate the speaker to change the sound projection directivity in a few seconds.

Coupling between traditional horns occurs a lot of comb effects resulting in poor sound projection and coherence in the space due to bad coupling between cabinets.

Thanks to the specific DSP treatment, comb effects are limited to ensure a good coupling between CM-a cabinets for FOH use. We call that ‘’X-comb’’ technology.

Description	2-way, Vented self-powered coaxial monitor
Usable bandwith (-6dB)	55 Hz-20 kHz ([Extended] preset)
Maximum SPL Peak / 1m	140.6 dB (1)
Coverage directivity (-6dB)	80° x 60°, ''VERS'' rotating system (2)
Transducers	LF: 1 x 15", neodymium, weather resistant, HF: 1 x 1,4",neodymium, diaphragm compression driver
Input impedance	10 kΩ balanced
RMS power handling	1200 W (3)
Wedge angle	35° from vertical
Connectors	Balanced 1 x IN, 1x OUT Neutrik© XLR 1 x IN, 1 x OUT Neutrik© Powercon
Dimensions (H x W x D)	355 x 530 x 515 mm (incl. feet)
Weight	21,5 kg
Cabinet	Baltic birch plywood
Finish	High resistant Polyurea coating
Front	Steel removable grill on magnets

 

FR-X 12a

• Multi-functional FOH system
• For audiances of 100-3000 people
• Plug & Play system
• Adaptive (rotable) AF horn 80x30°
• X-comb technology inside
• Optimised for medium throw applications
• Active/Dante/Passive versions

FR-X 12a is compact, 2-way, self-powered enclosure. It features one 12’’ neodymium speaker in a bass-reflex enclosure and one 1,4’’ ferrite compression driver coupled to a versatile AF horn.

FR-X 12a operates over the nominal frequency range of 55Hz to 20 kHz. The AF versatile horn generates a 80°x30° asymmetric directivity pattern and is easy to rotate in a few seconds. The cabinet is made of first grade Baltic birch plywood.

The FR-X rigging system allows assembling a horizontal or vertical array with constant curvature. Coupling between traditional horns causes a lot of comb effects resulting in poor sound projection and coherence in the space due to bad coupling between cabinets.

Thanks to the AF horn and specific DSP treatment, comb effects are eliminated to ensure a perfect coupling between FRX-a cabinets and create a coherent wavefront at any location. We call that ‘’X-comb’’ technology that permits the use of rotating horn to adapt directivity and curvature array.

Description	2-way, vented self-powered FOH system
Usable bandwith (-6dB)	55 Hz - 20 kHz ([ Extended] preset)
Maximum SPL Peak / 1m	139.5 dB (1)
Coverage angle (-6dB)	80° x 30°, "VERH-II" rotating system (2)
Transducers	LF: 1 x 12", neodymium, weather resistant, HF: 1 x 1,4", ferrite, compression driver, AF versatile horn
Input impedance	10 kΩ balanced
RMS power handling	1700 W (3)
Connectors	Balanced 1 x IN, 1x OUT Neutrik© XLR 1 x IN, 1 x OUT Neutrik© Powercon
Rigging components	H coupling bars + standard cargo
Dimensions (H x W x D)	604 x 382 x 437 mm (incl. feet) / 22,5°
Weight	33 kg
Cabinet	Baltic birch plywood
Finish	High resistant Polyurea coating
Front	Steel removable grill on magnets

ARES 12i

• For audiences of 2000-20000 people
• True cylindrical dedicated wavefront
• Main PA for large stages
• Scalable up to 24 elements
• Passive/Fine tuning versions
• AF NETWORK manager

Suitable for a wide range of sound reinforcement applications from medium to large scale concerts & theaters where sound quality is crucial.

ARES 12i is state of the art self-powered 3-ways line array system featuring dual 12’’ speakers for LF, eight 3’’ drivers delivering outstanding MF and two 1’’ HF exit compression drivers coupled to a waveguide that provides smooth top end.

The 4-ways Powersoft built-in amplifier is managed by AUDIOFOCUS DSP that uses SHARKS technology for zero latency filtering IIR and FIR.

ARES 12i operates over the nominal frequency range of 45 Hz to 20 kHz.

Analog and AES input can be used and the system can be controlled by the AF manager software to ensure perfect matching between the system and the audience.

Thanks to this, beam steering can be implemented to cancel any form of reflections
in theaters and operas.

Description	ARES 12
Description	3-way, vented self-powered line array
Usable bandwth (-3dB)	45 Hz - 20 kHz
Power capacity (Wrms)	1200 W (LF) / 340 W (MF) / 140 W (HF)
Peak power	2500 W (LF) / 2500 W (MF) / 2000 W (HF)
Dispersion (h x v)	110° x 7° (average)
Senssitivity 1W / 1m	100 dB (LF) - 109 dB (MF) - 110dB (HF)
SPL max / 1m	134 dB (LF) - 143 dB (MF) - 143dB (HF)
Rigging angles	Li,ear & logarithmic & steering positions
Qty of angles	0 to 5°: 0,5° steps; 5 to 10°: 1° steps 10 to 14°: steering 1° steps
Inputs	Analog, AES, Dante (in option)
DSP + treatment	Shark 96 kHz + possibility of beam steering
Interface	Oled display, 24 presets, easy to use
Dimensions (h x w x d)	370 x 1170 x 620 mm (including pins)
Weight	65,5 kg (active)
Finish	High resistant Polyurea coating
Materiel	First grade birch plywood 15 & 24 mm
Compatible	AF management software, DSP network
Shooting tool	Ease Focus and GLL viewer
Accessories	Flying frame, dolly with protective cover, rain cover, coupling frame for ARES 8

MTSub218MKIIa

• Cardioid/end fire setups
• Truck size dimensions
• 2000 Wrms power handling
• Touring state of the art 2x18''
• Pole mount socket
• Active/Passive versions

MTsub218 MKII is a powerful state-of-the-art subwoofer designed for a wide range of sound reinforcement applications from outdoor events and concert halls to theatres where high-end sound quality and return on investment are crucial.

Dual 18’’ Faital Pro offers efficiency of 106dBspl 1W/1m 2pisr and a wide bandwidth 40-110Hz @-3dBspl. Power handling of MTsub218 MKII sub bass is 1400Wrms and active version is capable to reach 2000 Wrms due to its internal high quality Powersoft Digital amplifier.

The design of this subwoofer is absolutely unique and has been made by our R&D department to ensure an exceptional sensitivity.

Thank to this specific principle, MTSub218 MKII has a more powerful throw than competitors.

The passive version can be managed with Lake, XTA, Matrix Media or Q-Sys but we recommend Powersoft amplifiers with custom presets especially prepared for Audiofocus Mtsub218 MKII.

Plug & Play version offers to the user a full secured and easy to setup subwoofer. The perfect matching between Powersoft module and transducers gives high damping, punch and deep reproduction of the sound. The internal DSP treatment is managed with 4 clever preset including cardio mode.

Specifications			MTsub218(a) MKII
Type			Vented T-ligned - Passive/Active
Components			2 x 18"" woofer & 3"" Voice coil
Power handling RMS / Peak			Active: 2000 W RMS / 4000 W Peak
Frequency range @-3dBspl			Active: 40 Hz - 110 Hz
Sensitivity spl 2πsr			106 dB
SPL@ Peak power			Active: 142 dB
Line Connectors (Active)			1 x IN, 1 x OUT Neutrik© XLR
Construction			Birch marine Plywood 15 & 24 mm
Finish			High resistant Polyurea coating
Dimensions (WxHxD)			1200 x 605 x 800 mm
Weight			Active: 91 kg
Conform politicii de marketing a producatorului, pretul se comunica numai telefonic.
OBSERVATII privind Oferta Toate produsele sunt absolut noi, sigilate, originale Audiofocus, import Belgia Toate produsele au o garantie de 3 ani, extinsa de Reprezentanta la 4 ani!! Optional se pot achizitiona Huse, LID-uri magnetice, Hard-case, la pret de cost. Termenul de livrare este de 10 zile din momentul confirmarii platii, import direct. Sistemul are toate elementele de protectie OUTDOOR incluse. Plata dvs este garantata de banca cu Bilet la Ordin pana la livrarea integrala.

 

 

Spune-ţi opinia

Numele tău:
Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: