JBL AM7200-AL7115 Passive PA SET

Producător: JBL
Cod produs: JBL AM7200-AL7115 Passive PA SET
Disponibilitate: indisponibil momentan

42.720,00 RON TVA inclus

Pret: 8.373,12€
VAT Incl.

Descriere
Opinii (0)

Descriere

JBL AM7200-AL7115 Passive PA SET se compune din doua speakere JBL AM7200/95 si doua subwoofere JBL AL7115. Puterea suportata a intregului sistem pasiv este de 2900 W RMS, respectiv de peste 10000 W in peak, ceea ce face acest sistem extrem de fiabil in conditii de utilizare normala. Import SUA, 3 ani garantie!!!

Detalii Tehnice:

JBL AM7200/95

· Frequency Range (-10 dB): 260 Hz - 20 kHz

· Frequency Response (+/-3 dB): 330 Hz - 18 kHz

· Coverage Pattern: 90x 50, rotatable waveguide

· Directivity Factor (Q): 11

· Directivity Index (DI): 10.5 dB

· Crossover Modes: Bi-amp/Passive switchable

· Crossover Frequency: 2.2 kHz

· Transducer Power Rating (AES): MF: 350 W (1400 W peak), 2 hrs

· HF: 100 W (400 W peak), 2 hrs

· Long-Term System Power Rating (IEC): MF/HF: 200 W (800 W peak), 100 hrs

· Maximum SPL5: Bi-amp mode:

· MF/HF: 133 dB-SPL cont avg (139 dB peak)

· Passive mode:

· MF/HF: 133 dB-SPL cont avg (139 dB peak)

· System Sensitivity (1W @ 1m): Passive mode: 108 dB SPL

· Nominal Impedance: 8 ohms

· Midrange Driver: JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive dual voice-coil internal driver

· Sensitivity (1W @ 1m)

· (Midrange): 108 dB SPL

· High Frequency Driver: JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

· Sensitivity (1W @ 1m)

· (High Frequency): 113 dB SPL

· Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

· Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

· Finish: Black DuraFlex finish.

· White available upon request.

· Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

· Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

· Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.

· Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm

· (21.6 x 22.1 x 25.9 in)

· Net Weight: 27.2 kg (60 lb)

JBL AL7115

Frequency Range (-10 dB): 40 Hz - 4.2 kHz
Frequency Response (+/-3 dB): 47 Hz - 3.0 kHz
Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC): 600 W (2400 W peak), 100 hrs
Maximum SPL: 50 Hz -125 Hz: 127 dB-SPL cont avg
(133 dB peak)
125 Hz - 800 Hz: 126 dB-SPL cont avg
(132 dB peak)
System Sensitivity
(dB-SPL, 1W @ 1m): 50 Hz - 125 Hz: 97 dB
125 Hz - 800 Hz: 97 dB
Nominal Impedance: 8 ohms
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex finish.
White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)
Net Weight: 25.9 kg (57 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.