Martin Audio H3T - S218 & Rack Amps SET
Cod produs: Martin Audio H3T - S218 & Rack Amps SET
Disponibilitate: disponibil in 8-10 zile
VAT Incl.
Descriere
Martin Audio H3T - S218 & Rack Amps este un sistem de sonorizare performant, perfect pentru aplicatii LIVE, sau DJ, avand 4000W RMS cu 16000W in peak in banda de frecvente 35-18000Hz, cu un randament foarte bun, la un SPL max 136dB, iar rack-ul de amplificatoare astfel configurat permite un excelent regalj bi-amp gratie DSP-ului prezent in ambele amplificatoare, iar Patch-urile simplifica la maximum conectica. Astfel, amplificatorul Powersoft cu 4 canale va deservi bi-amp Martin Audio H3T, iar amplificatorul LabGruppen ramane dedicat subwooferelor 2 x 18”cu setarile aferente subwooferelor, low cut la 35Hz, crossoverarea facandu-se dupa preferinte. Se pot stoca in ambele amplificatoare preseturi diferite sub forma de Usere.
Disponibilitatea este de un singur SET (v. instructiunea “Buy Now”), astfel incat primul venit va fi primul si unicul servit la acest pret mai mult decat rezonabil pentru acest sistem puternic.
Sistemul este ex-demo la speakere, aceastea avand o garantie de 3 luni, iar rack-ul de amplificatoare este absolut nou, avand o garantie de 3 ani.
Sistemul se aduce numai cu pre-comanda, plata integral anticipat, iar termenul de livrare este de aproximativ 8 zile, rack-ul de amplificatoare fiind deja in stoc. Pretul include si toata conectica necesara, transportul, import intracomunitar.
Starea tehnica a speakerelor este excelenta, estetic ok.Este o investitie buna, sigura,o oportunitate ce nu trebuie ratata, sistemul absolut nou fiind de doua ori mai scump, acum la OFERTA. Inainte de a face plata, va rugam sunati la magazin pentru re-verificarea disponibilitatii.
Martin Audio H3T - S218 & Rack Amps set se compune din:
2x Martin audio S218, incl wheels
2x Martin audio H3T incl wheels
Rack amplifiers with:
1x Powersoft Quatro Canalli, 4ch, DSP & Dante amplifier
1x LabGruppen PDX 3000 , 2 ch, DSP amplifier
2x T.racks Patch#
1x T.racks Signal distributor
1x Thon Rack 6u
1x Patch XLR cables SET
1x Speakon Cables 4-wire SET with Neutrik connectors 4 pole-Fx
Martin Audio S218
TYPE Dual-driver vented sub-bass system
FREQUENCY RESPONSE (1) 35Hz-150Hz ± 3dB
DRIVERS 2 x 18" (460mm)
RATED POWER (2) 1000W AES, 4000W peak
RECOMMENDED AMPLIFIER 800-2000W into 4 ohms
SENSITIVITY (3) 102dB
MAXIMUM SPL (4) 130dB continuous, 136dB peak
IMPEDANCE 4 ohms nominal
DISPERSION (-6dB) –
CROSSOVER 150Hz active
ENCLOSURE 320 litre, multi-laminate birch ply
FINISH Textured black paint
PROTECTIVE GRILLE Black perforated steel
CONNECTORS 2 x Neutrik NL4
FITTINGS (100mm) castors
DIMENSIONS (W) 561mm x (H) 1066mm x (D) 780mm
WEIGHT 87kg
Martin Audio H3T
The Blackline H3T is a very high performance, all-horn, three-way system in a single, wide-bandwidth package.
The Hybrid™ low frequency section comprises a horn-loaded 15” (380mm) / 4” (100mm) voice coil driver that
is reflex loaded to extend the LF output to below the natural horn cut-off point. The 10” (250mm) mid-horn
features a unique ‘phase-ball’ loading device and is teamed with a 70º x 40º horn-loaded 1” (25mm) exit
compression driver for efficient mid-HF performance. The system has a switchable passive 2kHz mid-HF
crossover network to permit bi-amp/tri-amp operation.
technical specifications
TYPE Three-way bi-amp/tri-amp trapezoid Hybrid fully horn loaded
FREQUENCY RESPONSE (1) 50Hz-18kHz ± 3dB
DRIVERS
15" (380mm) bass driver
10" (250mm) mid driver
1" (25mm) exit compression driver
RATED POWER
LF: 500W AES, 2000W peak
MF/(MF + HF): 300W AES, 1200W peak
HF: 60W AES, 240W peak
RECOMMENDED AMPLIFIER
LF: 400-1000W into 4 ohms / MF/(MF + HF): 400-650W into 4 ohms / HF: 100-400W into 4 ohms
SENSITIVITY
LF: 104dB / MF/(MF + HF): 104dB / HF: 106dB
MAXIMUM SPL (4) 130dB continuous, 136dB peak
NOMINAL IMPEDANCE LF: 8 ohms/ MF/(MF + HF): 8 ohms / HF: 8 ohms
DISPERSION (-6dB) 70º horizontal, 40º vertical
CROSSOVER 250Hz active, 2kHz active/passive
ENCLOSURE 250 litre, multi-laminate birch ply
FINISH Textured black paint
PROTECTIVE GRILLE Black perforated steel
CONNECTORS 2 x Neutrik NL8
FITTINGS 12 x M10 inserts / (100mm) castors
DIMENSIONS (W) 560mm x (H) 1066mm x (D) 780mm
WEIGHT 77.5kg
Opinii (0)
Spune-ţi opinia
Numele tău:Opinia ta: Notă: Codul HTML este citit ca şi text!
Nota: Rău Bun
Introduceţi codul din imagine:








