Picior XA2-PRO 2018, resigilat, made in Germany

Producător: Dynacord
Cod produs: Picior XA2-PRO 2018, resigilat, made in Germany
Disponibilitate: indisponibil momentan

35.124,00 RON TVA inclus

Pret: 6.884,30€
VAT Incl.

Descriere
Opinii (0)

Descriere

Picior XA2-PRO 2018, resigilat, made in Germany, se compune din 2 subwoofere Dynacord FX20-PRO, 1 top Dynacord FX12-PRO, 1 amplificator L3600FD cu DSP si setul de cabluri speakon cu Neutrik 4NLC aferent. Sistemul a fost doar expus pentru probe, demo la un expo-market, fiind apoi resigilat. Se prezinta ca nou, are garantie de 3 ani, este importat la comanda din Germania si poate fi livrat in 26 de zile lucratoare cu plata integral anticipat. ESTE UN PRODUS ORIGINAL DYNACORD, cu seriale, cod de bare, etc, verificat, stare impecabila. Disponibilitate: 4 set-uri.

Detalii tehnice:

FX12-PRO

The FX12-PRO is a 12“ 2-way horn-loaded, coaxial, fullrange cabinet. The speaker is loaded with neodymium high performance transducers from Electro-Voice, a 12” ND 12A woofer and a 1.4” compression driver. Total nominal impedance is 8 Ohm. Total power handling is 350 W RMS. Power amps up to 1200 W at 8 Ohm can be used in order to produce maximum dynamic range without the danger of thermal overload in non-controlled situations. Both drivers are protected by a “Voice Coil Tracking” system called protection circuitry which prevents overheating. The dispersion angles of the horn are H 80° ✕ V 40°. Extreme high sensitivity 106 dB/1 W/1 m maximum sound pressure level is 137 dB. Internal crossover between mid and treble drivers 1000 Hz recommended crossover frequency to subwoofers 140 Hz, 18 dB/oct. Butterworth. Without subwoofers this cabinet will provide excellent transmission of speech on mid to long distances. The housing is made of 15 mm birch plywood and coated with a very robust textured paint. The front grille is made of powder coated steel. 4 casters and 2 ergonomic handles provide ease of handling. The cabinet features 6 flying points. With the flying bracket FB-FX12-PRO it can be easily hung on a truss and positioned to cover the audience.

Neodymium ND6 driver
Neodymium ND12A mid transducer
Extremely high sensitivity, 106 dB SPL 1W/1m
Voice coil tracking protection

FX20-PRO

The FX20-PRO is a horn-loaded subwoofer with an Electro-Voice EVX180B 18“ high performance transducer. Nominal impedance is 8 Ohm, power handling 600 W RMS. Power amps up to 1200 W/ 8 Ohm can be used in order to have maximum dynamic range without the danger of thermal overload in noncontrolled situations. The sensitivity of the cabinet is 101 dB/1 W/1 m, the maximum SPL is 135 dB. The driver is protected by a “Voice Coil Tracking” system called protection circuitry which prevents overheating. Recommended crossover frequencies are 80 to 140 Hz depending on the application. The housing is made of 15 mm birch plywood and coated with a very robust textured paint. The front grille is made of powder coated steel. 4 casters and 4 ergonomic handles provide simple handling.