DJ top Hybrid Setup

DJ top Hybrid Setup este un sistem de sonorizare si lumini dedicat in special aplicatiilor DJ, dar poate fi folosit cu succes si in aplicatii LIVE pentru evenimente. Sistemul a fost optimizat sub raportul calitate/pret, vizandu-se randamentul si calitatea atat a sunetului, cat si a luminilor. Pretul afisat este pentru setup-ul din imagine, dar la cererea clientului, acesta poate fi oferit in orice configuratie. In acest sens, pentru configurare, va rugam sunati la magazin.

Sistemul dvs se compune din:

PRODUS	Nr buc	Detalii /specificatii de baza
PSSO QDA-4400 4-Channel Amplifier	2
PSSO QCA-10000 4-Channel SMPS Amplifier	1
PSSO DXO-48 PRO Digital Controller	1
EUROLITE Set 2x LED TMH-S200 + Case	2
EUROLITE LED B-40 Laser Beam Effect	1
EUROLITE DMX Move Controller 512 PRO	1
HD-PRO-3D, Line-array module	4
PSSO PRIME-182 Subwoofer 3000W	2
OMNITRONIC CM-5300 Club Mixer	1
EUROLITE Power Distributor	1
Speakon cable 10m with Neutrik	6
Patch cable	2
XLR-XLR Patch cable 0,3m	10
XLR-XLR Patch cable 5m	2
DMX cable SET (10m + 5*2m	1
Half Coupler	5
Hard Cases with wheels tops	4
Hard cases THON 10u	2
F34300 black	2
Towerlift VMB 85kg x2	2
VMB truss adapter T black	2
Chains	8
Safety hangs	10

 

PSSO QDA-4400 4-Channel Amplifier

 

PA amplifier with SMPS, 4 x 1100 W / 4 ohms, 4 x 650 W / 8 ohms

• 4-channel PA amplifier with class D circuitry 
• 4 x 1100 W/4 ohms
• Low weight and height due to integrated switch mode power supply
• Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
• Speaker switch-on delay
• 3 operating modes can be selected (stereo, parallel or bridged)
• 4 level controls for precise level adjustment
• Input sensitivity adjustable
• LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
• Complete protection set 
• Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
• Speaker outputs via lockable Speaker plugs
• Rugged steel chassis with aluminum front panel
• Air flow from front to rear
• The device is cooled by 2x temperature-controlled fan
• (19") 48.3 cm rack installation 2 U

TECHNICAL SPECIFICATIONS

Power supply:	100-240 V AC, 50/60 Hz
Power consumption:	830 W 1/8 power
Output power:	4 x 650 W RMS (8 ohms) 4 x 1100 W RMS (4 ohms) 2 x 2000 W RMS bridged (8 ohms)
Power connection:	Mains input P-Con (blue), mounting version Power supply cord with safety plug (provided)
Frequency range:	20 - 20000 Hz
S/N ratio:	>100 dB
THD:	<0.1 % at 1 kHz
Cooling:	2 x temperature-controlled fan , Air flow from front to rear
Impedance:	Input 20 kOhm , bal. Input 10 kOhm , unbal.
Gain:	39.9 dB
Circuitry:	Class D
Slew rate:	>10 V/µs
Damping factor:	>500
Crosstalk:	>65 dB
Control elements:	Power switch, mode switch (stereo/parallel/bridged), level control per channel, Input sensitivity switch
Controls:	Softstart; overheat; overload; short-circuit; progressive volume; VHF; limiter
Status LED:	Power, level meter, clip, protect
Connections:	Input: 4 x line via 5-pin XLR Output: 4 x line via 5-pin XLR Output: 4 x speakers via speaker built-in socket (f)
Input sensitivity:	0.775 V; 1.0 V; 1.81 V , switchable; 32 dB; 37 dB; 39.3 dB , switchable
Housing design:	(19") 48.3 cm rack installation 2 U
Dimensions:	Width: 48.3 cm Depth: 46.1 cm Height: 8.9 cm
Weight:	9.50 kg

 

PSSO QCA-10000 4-Channel SMPS Amplifier

PA amplifier with SMPS, 4 x 2150 W / 2 ohms, 4 x 2100 W / 4 ohms

• 4-channel PA amplifier with class I circuitry 
• 4 x 2100 W/4 ohms
• Low weight and height due to integrated switch mode power supply
• Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
• Speaker switch-on delay
• 3 operating modes can be selected (stereo, parallel or bridged)
• 4 level controls for precise level adjustment
• Input sensitivity adjustable
• LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
• Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
• Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
• Speaker outputs via lockable Speaker plugs
• Rugged steel chassis with aluminum front panel
• Rack installation with 2 units
• Neutrik Speakon outputs
• Air flow from front to rear
• The device is cooled by 2x temperature-controlled fan
• (19") 48.3 cm rack installation 2 U

TECHNICAL SPECIFICATIONS

Power supply:	230 V AC, 50 Hz
Power consumption:	1150 W 1/8 power
Output power:	4 x 2500 W RMS (2 ohms) 4 x 2100 W RMS (4 ohms) 4 x 1300 W RMS (8 ohms) 2 x 5000 W RMS bridged (4 ohms) 2 x 4200 W RMS bridged (8 ohms)
Power connection:	Fixed Power supply cord with safety plug
Frequency range:	20 - 20000 Hz
S/N ratio:	>80 dB
THD:	<0.05 % at 1 kHz
Cooling:	2 x temperature-controlled fan , Air flow from front to rear
Impedance:	Input 10 kOhm , unbal. Input 20 kOhm , bal.
Gain:	40.3 dB/ 0.775 V 38 dB/ 1.0 V 35.1 dB/ 1.4 V
Circuitry:	Class I
Slew rate:	>10 V/µs
Damping factor:	>800
Crosstalk:	>65 dB
Control elements:	Power switch, level control per channel, mode switch (stereo/parallel/bridged), Input sensitivity switch
Controls:	Overheat; overload; short-circuit; softstart; DC voltage; VHF
Status LED:	Power, level meter, clip, protect
Connections:	Input: 4 x line via 5-pin XLR Output: 4 x line via 5-pin XLR Output: 4 x speakers via speaker built-in socket (f)
Input sensitivity:	0.775 V; 1.0 V; 1.4 V , switchable; 26 dB; 32 dB; 38 dB , switchable
Housing design:	(19") 48.3 cm rack installation 2 U
Dimensions:	Width: 48.3 cm Depth: 44.5 cm Height: 8.9 cm
Weight:	13.90 kg

PSSO DXO-48 PRO Digital Controller

Digital speaker management system with real-time network communication, 4 inputs and 8 outputs

• Digital network speaker management system with 64-bit processing
• Premium components ensure excellent sound-features 
• Flexible routing configurations for all standard mono and stereo output operating modes
• 4 analog inputs and 1digital AES/EBU interface (XLR)
• 8 analog outputs (XLR)
• Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
• 10-band parametric EQ per input and output
• Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
• Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
• The intelligent software for PC and Mac allows convenient control with a computer
• Full configuration and real-time network communication via the built-in Ethernet interface 
• Up to 80 user presets storable in the device via software
• Control of all functions also possible via the controls at the front panel
• Alphanumeric LCD screen with 2 lines of 16 characters each 
• Input sensitivity digitally adjustable
• Inputs and outputs with 4-digit VU meter 
• Mute switch with LED indicator per output
• Up to 2000 ms signal delay adjustable for the inputs and outputs 
• Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
• Switchable phase (180°)
• Lock function for protecting the program settings
• Windows XP, Vista, 7, 8, 10 and Mac OS X 10.5.8 and better
• Control your speaker systems more flexible than ever with the DXO Control app
• DXO Control for iPad supports all functions of the PC software and is available for free from the app store
• Digital signal processor
• The device can be connected via USB to the PC in connection with DXO Software; The device can be connected via RJ45 (F) mounting version to the PC in connection with DXO Software
  The firmware can be updated via the PC connection
• (19") 48.3 cm rack installation 1 U

TECHNICAL SPECIFICATIONS

Power supply:	100-240 V AC, 50/60 Hz
Power consumption:	10.00 W
Power connection:	Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
Frequency range:	10 - 40000 Hz
THD:	<0.005 % at 1 kHz
Network connection:	Protocol: Ethernet TCP/IP via 1x RJ45 (F) mounting version
DSP:	Digital signal processor
Crossover frequency:	20-20000 Hz
Impedance:	Input 10 kOhm Input XLR (AES/EBU): 110 Ohm Output 50 Ohm
Gain:	Input: -50 dB to +12 dB Output: -50 dB to +12 dB
Filter:	Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct
Delay:	0 - 2000 ms
Dynamic range:	Input: 118 dB Output: 114 dB
Sample rate:	65 kHz
Connections:	Input: 4 x line via 3-pin XLR Output: 8 x line via 3-pin XLR
Max. level:	Input: +22 dBu Output: +12 dBu
USB port:	Typ B
PC connect:	DXO Software via USB; DXO Software via RJ45 (F) mounting version, firmware can be updated
Housing design:	(19") 48.3 cm rack installation 1 U
Dimensions:	Width: 48.3 cm Depth: 18.0 cm Height: 4.45 cm
Weight:	2.45 kg

 

2 x EUROLITE Set 2x LED TMH-S200 + Case

spot including PRO flightcase

EUROLITE LED TMH-S200 Moving Head Spot

LED moving head spot with color wheel, static & rot. gobo wheel, prism, frost, focus and zoom

• Equipped with a cold white 200 W COB LED
• Positioning within 540° PAN and 270° TILT
• Exact positioning via 16 bit PAN/TILT movement resolution
• Rotating 3-facet prism
• The prism rotates in both directions and at different speeds, prism index function
• Frost-filter
• Strobe effect with 1-18 flashes per second
• Internal programs
• Dimmer
• Dimmer speed (step response) adjustable
• Motorized focus
• Motorized zoom with 8-22° beam angle
• Automatic position correction
• Supports QuickDMX - the wireless DMX system from Eurolite
• Built-in phantom-powered USB port for QuickDMX receivers (accessories)
• Control board with LCD and foil-keyboard for adjusting the DMX-starting address, PAN/TILT-Reverse, Program, Reset
• Switch-mode power supply for operation between 100 and 240 volts
• P-Con terminals for power linking up to 8 units
• Additional rubber feet when the spot shall be positioned on the floor
• LED: 1 x COB (chip-on-board) 200 W CW
• Color wheel 1 x 9 dichroitic colors and open
  Rainbow effect with adjustable speed in both directions
• Gobo wheel with static gobos, 9 gobos and open
  shake effect
• Gobo wheel with rotating gobos, 7 gobos and open
  shake effect
• Slot-in gobo system for exchanging gobos without tools
• Gobos changeable
• Can be operated in 17 CH mode
• The device is cooled by cooling fan
• Controlling by Stand-alone; QuickDMX via USB (optional); DMX; Master/slave function; Sound to light via Microphone
• Flicker-free projection

ROADINGER Flightcase 2x TMH-S200

PRO flightcase for 2 x EUROLITE LED TMH-S200 Moving-Head Spot

• Developed for  EUROLITE LED TMH-S200 Moving-Head Spot or comparable Moving Heads
• Suitable for 2 units
• Interior and cover (not removable) upholstered with foam
• High-quality workmanship with multiplex birch wood, dark brown laminated
• Aluminum profile frames (30 mm) with rounded edges
• Three-leg, medium-sized steel ball corners (chrome)
• 2 hinges
• 2 high-quality butterfly locks 
• 4 high-quality plated case handles
• For perfect protection
• Transport aid: With wheels

TECHNICAL SPECIFICATIONS

Weight:	58.30 kg
EUROLITE LED TMH-S200 Moving Head Spot
Power supply:	100-240 V AC, 50/60 Hz
Power consumption:	250 W
IP classification:	IP20
Power connection:	Mains input P-Con (blue), mounting version Power supply cord with safety plug (provided)
Power output:	1 x P-Con (gray), mounting version
Fuse:	Device fuse 5 x 20 mm, T 3.15 A Fuse replaceable
Lamp type:	LED lamp
LED:	1 x COB (chip-on-board) 200 W CW
Max. TILT movement:	Exact positioning (16 bit resolution) 270° Auto position correction (feedback)
Max. PAN movement:	Exact positioning (16 bit resolution) 540° Auto position correction (feedback)
Flash rate:	1 - 18 Hz
Equipment:	Prism 3-fold; frost filter; gobo wheel with rotating gobos; gobo wheel with static gobos; Zoom motor-driven; Focus motor-driven; color wheel
Color generation:	Color wheel 1 x 9 dichroitic colors and open
Gobos:	Gobo wheel with static gobos, 9 gobos and open Shake effect Gobo wheel with rotating gobos, 7 gobos and open Outside diameter 20mm Image diameter 15mm Shake effect Slot-in gobo system for exchanging gobos without tools Gobos changeable
DMX channels:	17
DMX input:	3-pin XLR (M) mounting version
DMX output:	3-pin XLR (F) mounting version
Cooling:	Cooling fan
Control:	Stand-alone; QuickDMX via USB (optional); DMX; Master/slave function; Sound to light via Microphone
Beam angle:	8 - 22°
Beam angle (1/2 peak):	8 - 22°
Beam angle (1/10 peak):	8 - 22°
Illuminance in Lux (lx):	Narrow CW 3m: 22622 lx, 6m: 6278 lx Wide CW 1m: 31619 lx, 3m: 4309 lx, 6m: 1112 lx
Housing color:	Black
Display type:	Multicolor LCD display
Dimensions:	Width: 30.5 cm Depth: 33.0 cm Height: 51.5 cm
Weight:	14.70 kg
Noise classification:	Class 3 (clearly perceptible sounds)
Legal specifications
Ecodesign regulation:	Yes
Special product:	Not designed for household room illumination
Purpose:	Show effect lighting
ROADINGER Flightcase 2x TMH-S200
Maximum load:	50 kg
Material:	Glued plywood, 7 mm
Color:	Black, laminated
Compartment dimensions:	20.5 cm x 32 cm x 50 cm
Dimensions:	Width: 67.5 cm Depth: 37 cm Height: 70.5 cm
Weight:	18.70 kg

 

EUROLITE LED B-40 Laser Beam Effect

LED beam effect with RGBW color mixing and RG laser

• 5 high-power 8 W RGBW LEDs (4in1) for dynamic mirror ball effects
• 2 laser diodes project thousands of red and green laser beams
• Laser class 2M: does not require additional protective measures or appointment of a laser safety officer
• 7 built-in auto and music show programs
• Stepless RGBW color blend, dimmer and strobe effects
• Rotation speed variably adjustable
• LEDs are distributed in 3 groups which can be controlled individually via DMX
• Addressing and setting via control panel with 4-digit LED display
• Convenient wireless control via included IR remote control EUROLITE IR-16
• Supports QuickDMX - the wireless DMX system by Eurolite
• Built-in phantom-powered USB port for QuickDMX receivers (accessories)
• Hanging or standing installation possible
• IEC terminals for power linking up to 8 units
• Switch-mode power supply for operation between 100 and 240 volts
• LED: 5 x high-power 8 W 4in1 QCL RGBW
• Can be operated in 3; 10; 22 CH mode
• The device is cooled by cooling fan at the Base; cooling fan at the Head
• Controlling by Stand-alone; DMX; Sound to light via Microphone; QuickDMX via USB (optional); Master/slave function
• Is in Light J Software; EUROLITE LED PC-Control 512 software; EASY SHOW already preprogrammed
• Effect: Laser; multi beam effect

TECHNICAL SPECIFICATIONS

Power supply:	100-240 V AC, 50/60 Hz
Power consumption:	65 W
IP classification:	IP20
Power connection:	Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
Power output:	1 x IEC connector (F) mounting version
Fuse:	5 x 20 mm, T 1 A Fuse replaceable
Lamp type:	LED lamp
LED:	5 x high-power 8 W 4in1 QCL RGBW
Flash rate:	0 - 20 Hz
Laser class:	Class 2M
Laser color:	RG
Laser module:	G green 40 mW 532nm R red 100 mW 650nm
DMX channels:	3; 10; 22
DMX input:	1 x 3-pin XLR (M) mounting version
DMX output:	1 x 3-pin XLR (F) mounting version
Cooling:	Cooling fan at the Base Cooling fan at the Head
Control:	Stand-alone; DMX; Sound to light via Microphone; QuickDMX via USB (optional); Master/slave function; Light J Software; EUROLITE LED PC-Control 512 software; EASY SHOW
Housing color:	Black
Display type:	Monochrome 4 digits 7-segment LED display
Dimensions:	Width: 31 cm Depth: 31 cm Height: 39 cm
Weight:	4.20 kg
Noise classification:	Cl

EUROLITE DMX Move Controller 512 PRO

 

DMX controller with FX generator for motions

• DMX controller for DMX light effect units such as moving heads, scanners and LED spot lights with RGBW color mixture
• 512 DMX channels can be assigned and inverted as desired to 34 control channels (softpatch)
• For 24 fixtures with max. 34 control channels each
• USB port for storing program data
• Quick programming thanks to 9 integrated movement patterns and 6 color effects (pan/tilt position, fade time and running time adjustable)
• Several movement patterns and color effects can be used simultaneously
• Manual, time-controlled or sound-controlled chase running mode
• 3 DMX fixture levels can be controlled
• 8 motorized DMX channel faders for user-friendly control
• The motor faders provide a precise overview of the parameters when switching the individual banks, chases and scenes
• 2 jog wheels for pan/tilt
• Master fader for color and dimmer channels
• Blackout function
• Color-illuminated buttons provide easy orientation
• Backlit LCD (2 x 16 characters)
• 3-pin XLR connector
• Firmware update via USB
• Desktop console 
• Rack installation with 4 units
• Programmable 30 sequencens each with 485 scenes
• Can transmit up to 512 DMX channels
• Controlling by DMX; RDM
• (19") 48.3 cm rack installation 4 U

TECHNICAL SPECIFICATIONS

Power supply:	100-240 V AC, 50/60 Hz
Power consumption:	20 W
IP classification:	IP20
Power connection:	Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
Programs:	Programmable 30 Sequences Each with 485 Scenes
DMX channels:	Output 512
DMX output:	1 x 3-pin XLR (F) mounting version
Control:	DMX; RDM
Housing color:	Black
Available storage media:	USB devices (FAT 32)
USB port:	Typ A
Color:	Black
Housing design:	(19") 48.3 cm rack installation 4 U
Dimensions:	Width: 48.3 cm Depth: 17 cm Height: 8.9 cm
Weight:	3.82 kg

 

HD-PRO-3D, Line-array module

Description:	3-way full-range active enclosure
Usable bandwidth (-10 dB):	46Hz-19kHz
Maximun SPL:	146dB
Nominal directivity:	Horizontal 90° Vertical Array shape dependent  0°- 10°
Transducers:	HF:2*3"          MF: 4*5.5"         LF:2*12"
Nominal impedances:	HF:16ohms        MF:8ohms         LF:2*8ohms
RMS :	HF: 150W / MF: 400W / LF:2x800W
Rated power (continuous pink noise / program / peak):	HF: 300W / MF: 800W / LF:2x1600W

Transport Package Fly Case                                     Specification      330mm*1117mm*495mm

PSSO PRIME-182 Subwoofer 3000W

Pro PA bassreflex subwoofer, 2 x 18" woofer, 3000 W RMS, 4 ohms

• Rugged pro bassreflex subwoofer, qualified for clubs and touring applications
• Housing made of 25 mm (17 layers) and 18 mm (13 layers) birch plywood
• 2 x 45 cm (18") bass speaker, 115 mm voice coil (4.5"), diecast aluminum basket
• Premium custom-made drivers by European manufacturer CELTO Acoustique
• Parallel Neutrik Speakon connectors
• Metal flange for top speakers
• Carrying handles and rubber feet
• Scratch-resistant lacquer surface
• European engineering

TECHNICAL SPECIFICATIONS

Rated power:	3000 W RMS
Program power:	6000 W
Frequency range:	35 - 1300 Hz
Sensitivity:	101 dB (1W/1m)
Max. SPL:	142 dB
Impedance:	4 Ohm
Connections:	Input: 2 x speakers via 4-pol SpeakON mounting version (F)
Speakers:	2 x woofer (18") approx 45 cm
Type of speaker:	Subwoofer
Type:	Vented
Use of brands:	CELTO ACOUSTIQUE driver
Dimensions:	Width: 1.09 m Depth: 69.5 cm Height: 59.4 cm
Weight:	89.70 kg

 

 

OMNITRONIC CM-5300 Club Mixer

Professional 5-channel club mixer

• High-grade stereo mixer for clubs and numerous mobile PA applications
• 5 stereo input channels with gain control, 3-band kill EQ (+12/ -26 dB) and 10-digit LED level meter
• Front panel aux input
• Rear stereo input FOH for stage mixers
• Smooth dual-rail channel input faders (60 mm/100 mm)
• 3 microphone input channels with front combo connector
• Gain control, peak LED, 3-band EQ and on air switch per microphone channel
• One-knob compressor per microphone channel 
• 2-parameter adjustable auto talkover for automatic music level reduction when microphone is used
• Fully assignable smooth dual-rail crossfader (45 mm)
• Master section with two separately controllable stereo outputs, output 2 switchable to mono
• 10-digit stereo LED level meter, switchable between both master outputs 
• Balanced XLR and unbalanced RCA main outputs 
• Additional mono zone output (with switchable 80Hz HPF) which can be routed to the master bus or channel 5
• 10-digit LED level meter for the zone output
• Mono subwoofer output with integrated active crossover (frequency/level adjustable)
• All outputs with rear-side maximum level setting controls
• Adjustable effects send/return path, assignable to mic or master bus
• PFL section with PFL/master mix control and cue mix/split option
• Record output, independent of the master
• Rack installation, 7 U
• (19") 48.3 cm rack installation 7 U

TECHNICAL SPECIFICATIONS

Power supply:	115/230 V AC, 50/60 Hz
Power consumption:	25 W
Power connection:	Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
Frequency range:	20 - 20000 Hz
S/N ratio:	>82 dB line
THD:	Line <0.05 % at 1 kHz
Control elements:	Cue mix split function, power switch, Crossfader, regular talk over, FX send/returne control
Status LED:	Power, chanal level meter, switchable master level meter, CUE, chanal source; peak, ON AIR, Routing
Connections:	Input: 3 x Microphone via 3-pin XLR/6.35mm jack (F) combination socket (mounting version) Input: 6 x line via stereo RCA Input: 2 x line/phono via stereo RCA Input: 2 x AUX via 6,3-mm-jack (bal.) Input: 1 x AUX via 3.5 mm jack (stereo) mounting version Input: 1 x FX via 6.3 mm jack socket (stereo) mounting version Output: 4 x master via 3-pin XLR Output: 2 x master via stereo RCA Output: 1 x zones via 3-pin XLR Output: 1 x rec. via stereo RCA Output: 1 x Subwoofer via 3-pin XLR Output: 1 x FX via 6.3 mm jack socket (stereo) mounting version Output: 1 x headphones via 3.5 mm jack (stereo) mounting version
Chanals:	Input chanel: 2 x stereo with Line-AUX switch via RCA or jack plug, channel control via 100mm fader, 3-band tone control EQ, gain control, CUE switch, Crossfader selector switch, Input chanel: 2 x stereo with Line-Line/Phono switch via RCA, channel control via 100mm fader, 3-band tone control EQ, gain control, CUE switch, Crossfader selector switch, Input chanel: 1 x stereo with Line-line switch via RCA, channel control via 100mm fader, 3-band tone control EQ, gain control, CUE switch, Crossfader selector switch, Microphon chanal: 3 x mono via 3-pin XLR/6.35mm jack (F) combination socket (mounting version), channel control via 60mm fader, 3-band tone control EQ, gain control, adjustable single-knob compressor, ON AIR switch, FX routing switch Master output: 1 x stereo via XLR or RCA, channel control via Rotary dial, Level attenuator, Master output: 1 x mono + stereo via RCA or jack plug, channel control via Rotary dial, Level attenuator, Zone output: 1 x mono via XLR, channel control via Rotary dial, source selector, Level attenuator, low cut switch, Subwoofer output: 1 x mono via XLR, Level attenuator, hi-cut control, Headphones output: 1 x stereo via Plug 6,3mm/3,5mm (Jack), channel control via Rotary dial, Cue mix split function,
Housing design:	(19") 48.3 cm rack installation 7 U
Dimensions:	Width: 48.3 cm Depth: 10.6 cm Height: 32.8 cm
Weight:	6.00 kg

Spune-ţi opinia

Numele tău:
Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: