Rack amplificatoare PSSO cu DSP processor SET

Rack amplificatoare PSSO cu DSP processor SET

Producător: PSSO
Cod produs: Rack amplificatoare PSSO cu DSP processor SET
Disponibilitate: disponibil in 5 zile
18.000,00 RON TVA inclus
Pret: 3.726,00€
VAT Incl.

Descriere

Rack amplificatoare cu DSP PSSO 48-PRO SET se compune din:

Nr Crt

PRODUS

Nr

Buc

Descriere de baza

1

FlightCase Thon 10u

1

Rack amplificatoare de 10 unitati 19”

2

t.racks DBMeter

1

Decibel metru control vizual dinamica

3

Thet.amp PSD 2

2

Patch amplificatoare- speakere

4

PSSO DXO 48 PRO, speaker management processor DSP

1

Procesor cu functie de management sistem pentru reglarea DSP

5

PSSO QDA-4400

1

Amplificator 4 canale, 4400W (1100W /canal @ 4 OHM), poate fi setat in bridge pentru sisteme bi-amp

6

PSSO QDA-10000

1

Amplificator cu 4 canale, 10000W (2 x 5000W in bridge) dedicat basilor

7

Distribuitor de la 380V la 220V pe trei linii independente cu sigurante

1

Distribuitor de la 380V la 220V pe trei linii independente cu sigurante

 

Acest rack de amplificatoare prevazut cu DSP extern cu 4 intrari si 8 iesiri va distribui perfect semnalul audio in toata banda de frecvente, facand sunetul puternic, clar si precis. Un sistem foarte stabil, bine echilibrat pentru o varietate mare de speakere (inclusiv FX12/FX20), foarte flexibil, cu preseturi care sunt 100% editabile care apoi pot fi storate in processor si rechemate la o simpla apasare de buton, adaptand sistemul dvs la orice tip de aplicatie, sau sala, in configuratii care pot cobora pana la 2 OHM, avand astfel un randament maxim din partea amplificatoarelor profesionale care permit setarile in bridge, stereo, sau dual, sau configuratii pentru bi-amp (cabluri cu speakoane 4cai), sau chiar variante 3-WAY.

Se importa din Germania in numai 5 zile, plata integral anticipat si toate componentele au o garantie de 3 ani.

Detalii tehnice amplificatoare si processor:

PSSO DXO-48 PRO 

The DXO-48 PRO is your digital network speaker management system with a powerful 64-bit processor. 

 

EQUIPMENT

The device has 4 analog inputs and one digital AES/EBU interface (XLR) as well as 8 analog outputs (XLR). Each input and output is equipped with a 10-band parametric equalizer. The following filter types are available for each equalizer: Bell, High Shelf, Low Shelf, Notch and Allpass. All inputs and outputs offer 4-digit VU meters for better orientation.

OFTWARE FOR PC AND MAC

The intelligent software for PC and Mac lets you control the device from the comfort of your computer. It works with Windows XP, Vista, 7, 8 and Mac OS X 10.5.8 and higher. Up to 80 user presets can be easily stored, transferred and managed via the software. The integrated Ethernet interface enables integration into a network and real-time communication. Of course, control is also possible directly on the device with access to all functions.

SIMPLE CONTROL VIA APP

Or control your speaker systems as easily as never before with the DXO Control App: DXO Control for iPad contains all functions of the PC software and is available free of charge in the App Store.

FIRST CLASS QUALITY

PSSO's loudspeaker management systems stand for outstanding quality. First-class components guarantee excellent sound characteristics and a long enjoyment of the device.

Digital speaker management system with real-time network communication, 4 inputs and 8 outputs

  • Digital network speaker management system with 64-bit processing
  • Premium components ensure excellent sound-features 
  • Flexible routing configurations for all standard mono and stereo output operating modes
  • 4 analog inputs and 1digital AES/EBU interface (XLR)
  • 8 analog outputs (XLR)
  • Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
  • 10-band parametric EQ per input and output
  • Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
  • Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
  • The intelligent software for PC and Mac allows convenient control with a computer
  • Full configuration and real-time network communication via the built-in Ethernet interface 
  • Up to 80 user presets storable in the device via software
  • Control of all functions also possible via the controls at the front panel
  • Alphanumeric LCD screen with 2 lines of 16 characters each 
  • Input sensitivity digitally adjustable
  • Inputs and outputs with 4-digit VU meter 
  • Mute switch with LED indicator per output
  • Up to 2000 ms signal delay adjustable for the inputs and outputs 
  • Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
  • Switchable phase (180°)
  • Lock function for protecting the program settings
  • Windows XP, Vista, 7, 8, 10 and Mac OS X 10.5.8 and better
  • Control your speaker systems more flexible than ever with the DXO Control app
  • DXO Control for iPad supports all functions of the PC software and is available for free from the app store
  • Digital signal processor
  • The device can be connected via USB to the PC in connection with DXO Software; The device can be connected via RJ-45 (F) mounting version to the PC in connection with DXO Software
    The firmware can be updated via the PC connection
  • (19") 48.3 cm rack installation 1 U

·       Impedance:

Input 10 kOhm
Input XLR (AES/EBU): 110 Ohm
Output 50 Ohm

Gain:

Input: -50 dB to +12 dB
Output: -50 dB to +12 dB

Filter:

Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct

Delay:

0 - 2000 ms

Dynamic range:

Input: 118 dB
Output: 114 dB

Sample rate:

65 kHz

Connections:

Input: 4 x line via 3-pin XLR
Output: 8 x line via 3-pin XLR

Max. level:

Input: +22 dBu
Output: +12 dBu

USB port:

Typ B

PC connect:

DXO Software via USB
DXO Software via RJ-45 (F) mounting version, firmware can be updated

Housing design:

(19") 48.3 cm rack installation 1 U

Dimensions:

Width: 48,3 cm
Depth: 18,0 cm
Height: 4,45 cm

Weight:

2,45 kg

PACKAGING UNITS

PU

EAN

WEIGHT

DIMENSIONS

1

4026397483246

2,76 kg

53cm x 25cm x 8cm

PSSO QCA-10000 4-Channel SMPS Amplifier

4-channel PA Amplifiers with Integrated SMPS 
The 4-channel PA amplifiers of the QCA series offer ultra-high output power paired with a low weight and small overall height. The amplifiers use a patented second-generation Class I output circuitry which combines the high efficiency off Class D and the sound quality of Class A. Featuring a modern switch-mode power supply, the amplifiers provide up to 10 kW peak power and weigh less than 16 kg. This makes the series particularly attractive for mobile applications. The amplifiers can be used flexibly in stereo operation, parallel operation or in mono bridge operation. Extensive protective circuits will protect the amplifiers and the speakers connected. 

PA amplifier with SMPS, 4 x 2500 W / 2 ohms, 4 x 2100 W / 4 ohms

  • 4-channel PA amplifier with class I circuitry 
  • 4 x 2100 W/4 ohms
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 4 level controls for precise level adjustment
  • Input sensitivity adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units
  • Neutrik Speakon outputs
  • Air flow from front to rear
  • The device is cooled by 2x temperature-controlled fan
  • (19") 48.3 cm rack installation 2 U

Power consumption:

1150 W 1/8 power

Output power:

4 x 2500 W RMS (2 ohms)
4 x 2100 W RMS (4 ohms)
4 x 1300 W RMS (8 ohms)
2 x 5000 W RMS bridged (4 ohms)
2 x 4200 W RMS bridged (8 ohms)

Power connection:

Fixed Power supply cord with safety plug

Frequency range:

20 - 20000 Hz

S/N ratio:

>80 dB

THD:

<0,05 % at 1 kHz

Cooling:

2 x temperature-controlled fan , Air flow from front to rear

Impedance:

Input 10 kOhm , unbal.
Input 20 kOhm , bal.

Gain:

40,3 dB/ 0,775 V
38 dB/ 1,0 V
35,1 dB/ 1,4 V

Circuitry:

Class I

Slew rate:

>10 V/µs

Damping factor:

>800

Crosstalk:

>65 dB

Control elements:

Power switch, level control per channel, mode switch (stereo/parallel/bridged), Input sensitivity switch

Controls:

Overheat; overload; short-circuit; softstart; DC voltage; VHF

Status LED:

Power, level meter, clip, protect

Connections:

Input: 4 x line via 5-pin XLR
Output: 4 x line via 5-pin XLR
Output: 4 x speakers via speaker built-in socket (f)

Input sensitivity:

0,775 V; 1,0 V; 1,4 V , switchable; 26 dB; 32 dB; 38 dB , switchable

Housing design:

(19") 48.3 cm rack installation 2 U

Dimensions:

Width: 48,3 cm
Depth: 44,5 cm
Height: 8,9 cm

Weight:

13,90 kg

QDA-4400 4-CHANNEL AMPLIFIER

Reliable and robust amplifier


Are you looking for an amplifier for the club or the tour of your band? With the QDA-4400 from PSSO, you get a professional and reliable workhorse for your event.

PROFESSIONAL EQUIPMENT

Use the stereo PA amplifier in 3 different ways: In stereo, parallel or bridge mode. For each channel, you have an LED VU meter and LEDs for activated protection circuit (Protect), overload (Clip) and signal. Thus you always maintain an optimal overview during operation. The built-in limiter and loudspeaker switch-on delay ensure the safety of your audio system. 2 temperature-controlled fans and a protective circuit protect against heat problems and round off the equipment package.

ROBUST BUT LIGHTWEIGHT

With its robust steel housing and aluminum front panel, the QDA-4400 is absolutely road-proof. Nevertheless, thanks to Class D technology, it is lightweight and requires only 2 height units in your rack.

PA amplifier with SMPS, 4 x 1100 W / 4 ohms, 4 x 650 W / 8 ohms

  • 4-channel PA amplifier with class D circuitry 
  • 4 x 1100 W/4 ohms
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 4 level controls for precise level adjustment
  • Input sensitivity adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • Complete protection set 
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs
  • Rugged steel chassis with aluminum front panel
  • Air flow from front to rear
  • The device is cooled by 2x temperature-controlled fan
  • (19") 48.3 cm rack installation 2 U

Power supply:

100-240 V AC, 50/60 Hz

Power consumption:

830 W 1/8 power

Output power:

4 x 650 W RMS (8 ohms)
4 x 1100 W RMS (4 ohms)
2 x 2000 W RMS bridged (8 ohms)

Power connection:

Mains input P-Con (blue), mounting version Power supply cord with safety plug (provided)

Frequency range:

20 - 20000 Hz

S/N ratio:

>100 dB

THD:

<0,1 % at 1 kHz

Cooling:

2 x temperature-controlled fan , Air flow from front to rear

Impedance:

Input 20 kOhm , bal.
Input 10 kOhm , unbal.

Gain:

39,9 dB

Circuitry:

Class D

Slew rate:

>10 V/µs

Damping factor:

>500

Crosstalk:

>65 dB

Control elements:

Power switch, mode switch (stereo/parallel/bridged), level control per channel, Input sensitivity switch

Controls:

Softstart; overheat; overload; short-circuit; progressive volume; VHF; limiter

Status LED:

Power, level meter, clip, protect

Connections:

Input: 4 x line via 5-pin XLR
Output: 4 x line via 5-pin XLR
Output: 4 x speakers via speaker built-in socket (f)

Input sensitivity:

0,775 V; 1,0 V; 1,81 V , switchable; 32 dB; 37 dB; 39,3 dB , switchable

Housing design:

(19") 48.3 cm rack installation 2 U

Dimensions:

Width: 48,3 cm
Depth: 46,1 cm
Height: 8,9 cm

Weight:

9,50 kg

 

Opinii (0)

Spune-ţi opinia

Numele tău:
Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: