Used d&b audiotechnik E12-E8-Y7P-B6-D20 PA SET

d&b audiotechnik E12-E8-Y7P-B6 Used, Second hand se compune din:

2 buc E12 12"/1,3" monitoare, topuri side-fill, cate doua in case, inclusiv sistemul de prindere
2 buc  E8 8"/1" monitoare, topuri side-fill, cate doua in case, inclusiv sistemul de prindere
4 buc Y7P 2x8"/1.4" module pasive line-array orizontale, inclusiv sistemele de prindere
4 buc B6 18" High Performance Subwoofer cu lid-uri si dolly
2 buc D20 4Ch amplificatoare de putere cu DSP incorporat, dedicate
1 buc R1 remote control software

1 set complet de cabluri

Produsele sunt second-hand in stare excelenta, sunt fabricate integral in Germania, pot fi aduse in numai 5 zile cu plata integral anticipat, au o garantie de inca 6 luni. O excelenta achizitie pentru sonorizari la evenimente cu pana la 1000 de persoane.

2pcs E12 12"/1,3" high performance coaxial loudspeakers in flightcase with brackets
2pcs E8 8"/1" high performance multipurpose loudspeakers in flightcase with brackets
4pcs Y7P 2x8"/1.4" passive loudspeakers in flightcase with brackets
4pcs B6 18" High Performance Subwoofer with transport lids and sleeves
2pcs D20 4Ch power amplifier
1pc R1 remote control software
cabling

Detalii, prezentare si specificatii tehnice:

E12

The E12 and E12-D are high performance 2-way multipurpose loudspeakers, employing an integrated coaxial driver. The E12 and E12-D can be used for speech and music applications as stand-alone full range systems or incorporated into larger distributed sound reinforcement situations and, with the addition of an E15X or B4 subwoofer, can also easily reproduce high level music program. The multifaceted shape of the enclosure allows use either in an upright or horizontal orientation as well as deployment as a stage monitor. The E12 has an 80° x 50° dispersion pattern (h x v), while the E12-D has a wider 110° x 50° pattern. The horns in both loudspeakers are easily rotatable through 90° providing 50° x 80° or 50° x 110° dispersion patterns.
The E12 and E12-D cabinet is constructed from polyurethane integral hard foam with an impact resistant paint finish incorporating handles and a hidden socket to accept loudspeaker stands. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options.
Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.

E8

The E8 is a high performance 2-way multipurpose loudspeaker, employing an integrated coaxial driver.The E8 can be used for speech and music applications as a stand-alone full range system, or incorporated into larger distributed sound reinforcement situations. With the addition of an E12X subwoofer in passive or active mode or any other E-Series subwoofer, it can also easily reproduce higher level music program. The multifaceted shape of the enclosure allows use either in an upright or horizontal orientation as well as deployment as a stage monitor. The 90° x 50° dispersion pattern (h x v) of the horn is easily rotatable through 90° to provide a 50° x 90° dispersion pattern.
The E8 cabinet is constructed from polyurethane integral hard foam with an impact resistant paint finish incorporating a handle and a socket to accept loudspeaker stands. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options.
Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.

Y7P

The compact, 2-way passive Y7P loudspeaker features two 8” drivers in a dipole arrangement with a 1.4” compression driver mounted onto a rotatable CD horn.Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These point source, high performance cabinets offer 75° horizontal directivity controlled down to 500 Hz, matched with a vertical dispersion of 40°. The horn can be rotated by 90° to enable horizontal orientation.
The Y7P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the Y-Series, either ground stacked or flown.
The loudspeaker cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish.
The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The cabinet incorporates a pair of handles whilst M10 threaded inserts are provided for attaching d&b rigging hardware. Additionally, two further M10 sockets accept the 8mm load pin to expand the mounting options.

B6

The B6-SUB is a high performance subwoofer designed for ground stacked applications, housing a long excursion 18” driver built into a bass-reflex design. When three or any multiple of three B6-SUBs are used, they can be positioned in a Cardioid Subwoofer Array with one cabinet physically facing backwards and driven by an amplifier channel with CSA mode selected. This achieves exceptional directivity control in lower frequencies and significantly reduces the energy radiating towards to the rear. The cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish.
The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam, whilst the side panels incorporate two handles. Four wheels are mounted to the rear and the enclosure features two runners to protect the bottom panel from scratching. Two correspondingly shaped recesses are incorporated into the top panel of each cabinet to accept these runners, preventing cabinet movement when stacked. An M20 threaded flange in the top panel accepts the d&b Loudspeaker stand winder M20. An optional transport lid protects the front of the subwoofer during transit.

D20

The 2 RU four channel D20 amplifier is ideally suited to mobile and installation applications which require low to medium Sound Pressure Level (SPL) capabilities. The D20 features the same Digital Signal Processing (DSP) platform as the latest generation of d&b amplifiers, containing configurations for all d&b loudspeakers except the J-Series and the M2 monitor, plus a linear mode.
The signal delay capability enables user definable settings of up to 10 s (= 3440 m/11286 ft), which can be applied independently to each channel. The same applies to the two 16-band equalizers, providing optional parametric, asymmetric, shelving or notch filtering.
The D20 incorporates a colour TFT touchscreen, offering quick access to the menu structure, while the rotary encoder can be used for fine adjustment. The front panel and the integrated touchscreen are tilted up for easy operation when the amplifier is below eye level.
The equal ratio of signal input to amplifier output channels increases application flexibility particularly for monitor, frontfill or effect channel use. The LoadMatch function integrated within the D20 amplifier electrically compensates for the properties of loudspeaker cable used.
The D20 incorporates Class D amplifiers utilizing a power supply with active Power Factor Correction (PFC) suitable for mains voltages 100 V - 240 V, 50 - 60 Hz and maintains a stable output when used with weak or unstable mains supplies. An NL8 provides all outputs on a single connector for loudspeaker multicores. Dual channel mode is driven through four individual NL4 connectors, while Mix TOP/SUB and 2-Way Active mode output configurations for applicable d&b loudspeakers are available via two central NL4 connectors. etherCON and RJ 45 connectors enable access to the d&b Remote network through OCA/AES70 via Ethernet and through CAN-Bus respectively.

R1

The R1 Remote control software presents a d&b system graphically, channel by channel, loudspeaker by loudspeaker, group by group, with faders and buttons arranged just as required. Dials and displays control equalization, delay, levels, switchable filter functions, Mute and power. Even an offline mode is available for advance preparation. R1 reads a file created by the d&b ArrayCalc simulation software to generate a project specific user interface. With this virtually defined and optimized system design, detailing the complete loudspeaker and amplifier configuration, R1 depicts everything to be controlled and monitored and transfers the settings to the d&b amplifiers. The R1 Remote control software is the virtual centre of any d&b Remote network, be it from a laptop in the control room, mix position or somewhere in the auditorium. Its intuitive user interface ensures efficient planning, unlocking the full potential of the d&b system approach.

 

Spune-ţi opinia

Numele tău:
Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: