CVR Pro Line-array Modules W-210/W-250, 9 kW SET

CVR Pro Line-array Modules W-210/W-250, 9 kW SET se compune din:

Component	Nr Bucati	Descriere
CVR Pro Audio Amplifier KM-2150	1	8 ohm stereo power: 2 x 1500W 4 ohm stereo power: 2 x 2250W 8 ohm bridged mono power: 4500W Input impedance: > 20 K / > 10 K Frequency response: 20 Hz - 20 kHz Signal-to-noise ratio: -105 dB THD + N (rated power, 4 ohm / kHz): 0.05% Degree separation: -60 dB Input connectors: XLR
CVR Pro Audio Amplifier KM-480	1	8 ohm stereo power: 4 x 800W 4 ohm stereo power: 4 x 1200W 8 ohm bridged mono power: 2400W + 2400W Input impedance: > 20 K / > 10 K Frequency response: 20 Hz - 20 kHz THD + N (rated power, 4 ohm / kHz): 0.05% Input sensitivity: 0.775 V / 1.0 V / 1.4 V
CVR Pro Audio Processor PRO-240	1	Configuration: 2 in 4 out 24-bit, 48 kHz sampling rate, ∑-△ AD/DA converter, 32-bit DSP chip Input processing includes: gain, mute, noise gate, high-cut, low-cut, 8-parameter EQ, phase, delay Output processing includes: crossover, 5-parameter EQ, gain, mute, compressor/limiter, phase, delay Every input and output can be matrix-assigned flexibly Adjustable PEQ frequency, gain and bandwidth, styles: Peak, H-Shelve, L-Shelve Styles of all high-cut, low-cut filter and distributor units: Butterworth, Linkwitz-Riley, Bessel. Choice slope is from -6 dB/Oct to -48 dB/Oct Adjustable compressor/limiter threshold, ratio, attack time and release time Adjustable threshold, attack time, release time of all noise gate All delay modules delay time can reach over 682 ms Parameter setting of every channel can be copied Inter-put signal generator, output options: pink noise, white noise, 20 Hz - 20 kHz adjustable sine wave and adjustable signal range 2 x 20 word LCD, backlight and key-press incorporate design, unique one key-press process method 32 user presets
Stairville PD-332	1	Power Distributor 32A CEE
Flight case for amp rack - 12U	1	Flight case for amp rack - 12U including Cables SET
CVR Pro Audio Line Array W-210A	8	Type: Line array system Power handling: LF 600W (RMS), 1200W (Prog), 2400W (Peak) HF 160W (RMS), 320W (Prog), 640W (Peak) Frequency response: 55 Hz - 20 kHz +/- 3 dB Sensitivity (1W @ 1M): LF 99 dB, HF 108 dB Max SPL (Peak/1M): LF 127 dB, HF 127 dB LF section: 2 x 10" neodymium woofers with 3" coil Nominal impedance: 16 ohm HF section: 2 x 2" neodymium compression driver with 51mm titanium diaphragm Nominal impedance: 16 ohm Output section: 2-channel Dispersion pattern: 110 deg H x 9 deg V Speaker cables: LF 1(+) 1(-), HF 2(+) 2(-) Input connectors: 2 x NL4MP Speakon Recommended crossover: LF 70Hz - 2 kHz, HF 2 kHz - 20 kHz
CVR Pro Audio Bass Cabinet W-250A	2	Type: Line array sub-bass system Power handling: 1200W (RMS), 2400W (Prog), 4800W (Peak) Frequency response: 40 Hz - 150 kHz +/- 3 dB Sensitivity: 112 dB (1W @ 1M) Max SPL: 143 dB (Peak/1M) LF section: 2 x 15" woofers with 4" coil Nominal impedance: 4 ohm Speaker cables: 1(+) 1(-) Input connectors: 2 x NL4MP Speakon Recommended crossover: 35 Hz - 120 kHz

Detalii Tehnice:

CVR Pro Audio Amplifier KM-2150

The most delicate nuances in sound quality should be handled by a pro, and the KM-2150 is one professional power amplifier that will not let you down. With innovative technology to reduce distortion and deliver pure, lucid tones along with uninhibited bass power, this cool-running powerhouse is an essential piece of any quality sound setup. It's built tough, with a sturdy steel and aluminum chassis, as well as a long list of protective features to keep it running smooth over plenty of long years on the road.

Specifications

• 8 ohm stereo power: 2 x 1500W
• 4 ohm stereo power: 2 x 2250W
• 8 ohm bridged mono power: 4500W
• Input impedance: > 20 K / > 10 K
• Frequency response: 20 Hz - 20 kHz
• Signal-to-noise ratio: -105 dB
• THD + N (rated power, 4 ohm / kHz): 0.05%
• Degree separation: -60 dB
• Input connectors: XLR
• Output connectors: Speakon and touch-proof binding posts
• Power requirement: 110 V - 120 V, 50 - 60 Hz
• Conformation: Steel and aluminum chassis
• Airframe dimension:
  • 483 mm W x 88 mm H x 430 mm D
  • 19 in W x 3.5 in H x 16.9 in D
• Net weight: 40 kg / 88.2 lb

CVR Pro Audio Amplifier KM-480

The KM-480 is built smart and solid with cool-running innovation and a durable steel and aluminum chassis, as well as a long list of protective features to make it the most secure power amplifier for musicians and event organizers. This fine design has top-notch tonal quality and can handle up to 4800 watts on 4 ohm bridged mono power.

Specifications

• 8 ohm stereo power: 4 x 800W
• 4 ohm stereo power: 4 x 1200W
• 8 ohm bridged mono power: 2400W + 2400W
• Input impedance: > 20 K / > 10 K
• Frequency response: 20 Hz - 20 kHz
• THD + N (rated power, 4 ohm / kHz): 0.05%
• Input sensitivity: 0.775 V / 1.0 V / 1.4 V
• Input connectors: XLR
• Output connectors: Speakon and touch-proof binding posts
• Power requirement: 110 V - 120 V, 50 - 60 Hz
• Conformation: Steel and aluminum chassis
• Airframe dimension:
  • 483 mm W x 88 mm H x 430 mm D
  • 19 in W x 3.5 in H x 16.9 in D
• Net weight: 32 kg / 70.5 lb

CVR Pro Audio Processor PRO-240

The PRO-240 can help you get the most out of your live sound setup with its comprehensive list of audio control and sound-enhancement features. Using the latest advancements in sonic technology, this sound processor is designed for convenient control and rapid operation so you can get clear, professional sound with the greatest efficiency.

Specifications

• Model: PRO-240
• Configuration: 2 in 4 out
• 24-bit, 48 kHz sampling rate, ∑-△ AD/DA converter, 32-bit DSP chip
• Input processing includes: gain, mute, noise gate, high-cut, low-cut, 8-parameter EQ, phase, delay
• Output processing includes: crossover, 5-parameter EQ, gain, mute, compressor/limiter, phase, delay
• Every input and output can be matrix-assigned flexibly
• Adjustable PEQ frequency, gain and bandwidth, styles: Peak, H-Shelve, L-Shelve
• Styles of all high-cut, low-cut filter and distributor units: Butterworth, Linkwitz-Riley, Bessel. Choice slope is from -6 dB/Oct to -48 dB/Oct
• Adjustable compressor/limiter threshold, ratio, attack time and release time
• Adjustable threshold, attack time, release time of all noise gate
• All delay modules delay time can reach over 682 ms
• Parameter setting of every channel can be copied
• Inter-put signal generator, output options: pink noise, white noise, 20 Hz - 20 kHz adjustable sine wave and adjustable signal range
• 2 x 20 word LCD, backlight and key-press incorporate design, unique one key-press process method
• 32 user presets; status and every preset can be saved and adjusted separately, with code protecting function
• With PC, you can remote control through USB and RS232 connectors
• 256 units linkable by RS485, and do remote link controlling by center-control equipment
• Power supply: AC 110 V / 220 V, 50 Hz / 60 Hz
• Product dimension:
  • 482 mm H x 232 mm W x 44 mm D
  • 19 in H x 9.1 in W x 1.7 in H
• Shipping dimension:
• 605 mm H x 310 mm W x 110 mm D
• 23.8 in H x 12.2 in W x 4.3 in D
• Net weight: 4.1 kg / 9 lb
• Gross weight: 5 kg / 11 lb

Flight Case 12U For Amps FC-12U

Flight case for amp rack - 12U

CVR Pro Audio Line Array W-210A

Engineered for distinctly-clear sound, the W-210A line array system is an ideal choice for professional audio performance. This fine design includes two 10" woofers, two 2" compression drivers, and a high-performance, low-distortion compression driver with an innovative horn design of waves phase philosophy. Delivering up to 3040 watts of peak power and 760 watts of continuous use, you're sure to have plenty of power handling for a variety of venues. This line array is paired with the W-250A flown sub-bass cabinet.

Specifications

• Type: Line array system
• Power handling:
  • LF 600W (RMS), 1200W (Prog), 2400W (Peak)
  • HF 160W (RMS), 320W (Prog), 640W (Peak)
• Frequency response: 55 Hz - 20 kHz +/- 3 dB
• Sensitivity (1W @ 1M): LF 99 dB, HF 108 dB
• Max SPL (Peak/1M): LF 127 dB, HF 127 dB
• LF section: 2 x 10" neodymium woofers with 3" coil
• Nominal impedance: 16 ohm
• HF section: 2 x 2" neodymium compression driver with 51mm titanium diaphragm
• Nominal impedance: 16 ohm
• Output section: 2-channel
• Dispersion pattern: 110 deg H x 9 deg V
• Speaker cables: LF 1(+) 1(-), HF 2(+) 2(-)
• Input connectors: 2 x NL4MP Speakon
• Recommended crossover: LF 70Hz - 2 kHz, HF 2 kHz - 20 kHz
• Array design: Arrays of fewer than 3 will provide poor dispersion control and are neither recommended nor supported.
• Rigging system: Please refer to the W-210A user manual before any operation
• Enclosure: Birch plywood
• Finish: Waterproof, wear-resistant textured black paint
• Dimensions:
• 855 mm W x 293 mm H x 600 mm D
• 33.7 in W x 11.5 in H x 23.6 in D
• 925 mm W x 360 mm H x 670 mm D (0.22 cbm)
• 36.4 in W x 14.2 in H x 26.4 in D
• Package dimensions:
• Net weight: 42 kg / 92.6 lb
• Gross weight: 45 kg / 99.2 lb

CVR Pro Audio Bass Cabinet W-250A

The W-250A is a dedicated sub-bass system that integrates seamlessly with the W-210A line array. Your flown array system gets the added power handling of twin 15" neodymium woofers with a magnetic structure, and suspensions engineered for maximum linear excursion. The result is pure, distilled bass with the resounding power of 1200 watts of continuous power and 4800 watts of peak power for every W-250A enclosure added to your array setup. The sub-bass system W-250A is paired with the line array model

Specifications

• Type: Line array sub-bass system
• Power handling: 1200W (RMS), 2400W (Prog), 4800W (Peak)
• Frequency response: 40 Hz - 150 kHz +/- 3 dB
• Sensitivity: 112 dB (1W @ 1M)
• Max SPL: 143 dB (Peak/1M)
• LF section: 2 x 15" woofers with 4" coil
• Nominal impedance: 4 ohm
• Speaker cables: 1(+) 1(-)
• Input connectors: 2 x NL4MP Speakon
• Recommended crossover: 35 Hz - 120 kHz
• Enclosure: Birch plywood
• Finish: Black paint
• Dimensions:
  • 855 mm W x 440 mm H x 820 mm D
  • 33.7 in W x 17.3 in H x 32.3 in D
• Package dimensions:
• 925 mm W x 510 mm H x 890 mm D (0.42 cbm)
• 36.4 in W x 20.1 in H x 35 in D
• Net weight: 72 kg / 158.7 lb
• Gross weight: 76 kg / 167.6 lb

Stairville PD-332 Power Distributor 32A CEE,

Tri-Phase Power Distributor. Professional made with digital, Volt- & Amp-Meter. Power Input: thomann 1x 32A CEE, Power Output: 6x 16A EU socket, 1x 32A CEE socket, Protection circuit breaker on each phase, Additional circuit breaker for residual current Fi 32A 4 pole 0.03A,, Digital Voltage Meter and Amp-Meter for each phase on the front side. Made for thomann 19" rack installations., Dimensions: 482 x 134 x 257 mm (LxHxW), Weight: 8,2 kg

Cables SET

Spune-ţi opinia

Numele tău:
Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: