CVR W-8 line array pasive speaker

Producător: CVR Pro-Audio
Cod produs: CVR W-8 line array pasive speaker
Disponibilitate: pre-comanda
14.264,40 RON TVA inclus
Pret: 2.795,82€
VAT Incl.

Descriere

Acest model de speaker line array de la CVR Audio este practic o clona JBL 2 x12" din noua serie 2016 a producatorului. Dedicat in special aplicatiilor outdoor, clientii vor aprecia atat puterea remarcabila a speakerului de 2,2 kW RMS urcand pana la pragul de 135 dB, cat si o foarte buna dispersie in banda de frecvente 52 Hz -20 kHz +/- 3dB, gratie celor 2 x 12" + 4 x 6,5" + 2 x 3" drivere toate neodymium, ceea ce-l recomanda si extrem de fiabil. Fiind o boxa pasiva pe 3 cai de tip line array, ne asteptam ca la aceste dimensiuni reduse sa vedem o compresie destul de mare datorata bineinteles si semi-compartimentarii, ceea ce explica cei 135dB promisi de producator. Pretul CIF Bucuresti exprimat este per speaker, importul se face din Hong Kong, iar garantia oferita este de 1 an. Produsul se importa numai la comanda, cu plata integral in avans, garantata cu Bilet la Ordin. Conform precizarilor facute de producator, acest pret absolut promotional ne asteptam sa creasca in urmatoarele 3 luni, poate chiar sa se dubleze. Fiind echipamente cu greutate mare, shipping-ul nu se poate face decat by sea (Cargo), in caz contrar transportul va fi foarte scump (by air), iar livrarea (by sea) se poate face in 30 de zile de la deschiderea comenzii si confirmarea platii. Produsul are o cantitate minima de comandat de 4 buati, iar pentru comenzi mai mari va rugam sa ne contactati telefonic pentru a stabili detaliile de plata si livrare si pentru a intra in posesia Biletului la ordin care securizeaza investitia dvs pana in momentul intrarii in posesie.

W-8 is a line array system which is made of two 12"neodymium woofers,
four 6.5"midrange speaker units, two 3"titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of wave phase philosophy.
   W-8 speaker box is trapezoid shaped, hi, mid, low driver units all with independent horn output, which improved the speaker sound, maximum lowed the intervention between the drivers. The precise positioning position between the driver units which verified the speaker box very small, but also to ensure the gap between the cabinet to cabinet minimize. Even several boxes combination can also with a precise point forming a line array group, resulting in excellent sound quality, each box is installed with hanging assembly, can be  convenient for hanging, assembling, which application W-8 line array performance excellent to large stadiums, big outdoor concerts, commercial events, etc.  

 

Model

W-8

Type

Line array system

Frequency Response

52Hz-20KHz±3dB

Power handling

LF 2×600W(RMS)2×1200W(PEAK)

MF 600W(RMS)1200W(PEAK)

HF 200W(RMS)400W(PEAK)

Sensitivity

LF 104dB(1W@1M)

MF 107dB(1W@1M)

HF 111dB(1W@1M)

Max@S.P.L

LF 135dB(PEAK/1M)

MF 135dB(PEAK/1M)

HF 134dB(PEAK/1M)

LF section

2×12" (310mm)neodymium woofer

75mm(3in) coil

Nominal impedance

8 ohm

MF section

4×6.5" (170mm)neodymium MF

50mm(2in)coil

Nominal impedance

8 ohm

HF section

2×3"neodymium compression driver

with 75mm titanium diaphragm

Nominal impedance

16 ohm

Output section

3-channel

Dispersion pattern

110°H×7.5°V

Finish

Water-proof,wear-resistant textured black paint

Array design

Arrays of less than 3×W-8 will

provide poor dispersion control and

are neither recommended nor supported

Speaker cables

LF 1(+)1(-)&2(+)2(-) MF 3(+)3(-) HF 4(+)4(-)

Rigging system

Please refer to the W-8 user

manual before any operation

Input connectors

2×Neutrik NL8

Recommend crossover

LF 60Hz-400Hz

MF 400Hz-1.8kHz

HF 1.8kHz-20KHz

Dimensions

1100×405×595mm(W×H×D)

Package dimensions

1170×475×665mm/0.37cbm

Enclosure

Birch Plywood

Net weight

60kg

Gross weight

64kg

Opinii (0)

Spune-ţi opinia

Numele tău:
Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: