Descriere
Dynacord-COBRA-4-TOP este un top activ pe trei cai destinat sistemelor COBRA, avand urmatoarele caracteristici de baza: 700 W RMS, 1400W in program, cu o dispersie a sunetului pana la 40m, 131 dB, 90Hz-17000Hz.
Import Germania, 3 ani garantie!!! Pentru cotatia de pret a zilei, va rugam sunati la magazin. Produsul se aduce numai cu pre-comanda.
Detalii tehnice:
DYNACORD´s COBRA-4-TOP is an active 3-Way cabinet for use as a nearfield cabinet in compact line arrays and other demanding applications, where wide horizontal coverage, extremely low distortion and a low sensitivity against acoustic feedback are mandatory.
Depending on the application, the COBRA-4-TOP cabinet can be used up to 40m throw distance. The mid-range of the COBRA-4- TOP uses selected DYNACORD C8 cone transducers in a line array configuration. The C8 transducers show significantly lower distortion than typical horn/compression driver combinations.
Therefore an extremely natural sound quality over large distances can be achieved. For the high frequencies of the COBRA-4-TOP an Electro-Voice DH2T titanium diaphragm driver and a HPT94 constant directivity horn are used in order to prevent any set-up and adjustment problems for the main direction and the near field. The DYNACORD COBRA-4-TOP uses a dual vented direct- radiator design equipped with an Electro-Voice EVX155 for the low frequencies. For Near-Fill and Side-Fill applications and for the reinforcement of speech the COBRA-4-TOP cabinets can be used fullrange without any problems.
The cabinet is equipped with an electronic circuit called VOICE COIL TRACKING PROTECTION. This circuit senses the terminal voltage of the transducers and simulates the thermal behaviour of the transducer voice coils. In case of potential thermal overload the power applied to the speakers is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The VOICE COIL TRACKING PROTECTION exhibits “soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperatures have reached a safe value.
Datasheets / Manuals
Cabinet
MID - HIGH Cabinet
Configuration
Compact line array / active 3-way
Nominal impedance: LOW - MID - HIGH
8 Ohms - 8 Ohms - 8 Ohms
Rated power RMS: LOW - MID - HIGH
400 W - 200 W - 100 W
Program power: LOW - MID - HIGH
800 W - 400 W - 200 W
SPL 2,83 V / 1m 1 W / 8 Ohm
100 dB
Max. SPL 1m (calculated)
131 dB
Frequency response ( -10dB )
90Hz - 17kHz
measured with DSP 244 preset
COB4PWHTOP200203
Coverage angle 1 kHz (-6dB)
H 120° x V 30°
Coverage angle 10kHz (-6dB)
H 90° x V 40°
Active crossover frequency
124Hz - 700Hz - 4kHz
Voice coil tracking protection
LOW - MID - HIGH
Components HIGH
DH 2T / HPT 94
Order No.
355 391 / 357 979
Components MID
C8 Line array
Order No.
4x 361 376
Components LOW
EVX155
Order No.
359 561
Connector wiring HIGH
8-pole 4+/4-
Connector wiring MID
8-pole 3+/3-
Connector wiring LOW
8-pole 2+/2-
Connector model
Speakon 2x NL8 MPR
Dimensions (WxHxD) mm
600 x 495 x 717
Shipping weight
60 kg
Net weight
54.5 kg
Enclosure material
Birch plywood 18mm
Finish
Black polyurethane
Grille
Powder coated steel
Handles
2
Ancra Tracks
4
Webbing strap point
2
Front cover
1
Castors
4
Warranty
36 Months
Opinii (0)
Spune-ţi opinia
Numele tău:Opinia ta: Notă: Codul HTML este citit ca şi text!
Nota: Rău Bun
Introduceţi codul din imagine:








