JBL VRX-918SP-DAS Event 210A Line-array SET

0 opinii | Spune-ţi opinia

Producător: JBL
Cod produs: JBL VRX-918SP-DAS Event 210A Line-array SET
Disponibilitate: disponibil in 8-10 zile

70.560,00 RON TVA inclus

Pret: 13.829,76€
VAT Incl.

Descriere
Opinii (0)

Descriere

JBL VRX-918SP-DAS Event 210A Line-array SET se compune din:

Component	Nr Buc	Descriere de baza
DAS Event 210A	4	Dual 10-Inch Powered Array Speaker The Event 210A Line is a three-way powered line array in a double 10" "dual-band" configuration, 540W RMS, 134 dB
JBL VRX-918-SP	2	Powered 18 Flying Subwoofer, Power Rating : 1500 Watts Peak LF: Dual-Bridged Technology™, Class D Frequency Range: 31 Hz – 220 Hz Dimensions (H x W x D): 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in) Frequency Response: 34 Hz – 220 Hz Maximum Peak Output: 126 dB SPL at 1m Bandpass Nominal Impedance: LF: 2 x 2 ohms LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil Differential Drive® woofer with neodymium-magnet Audio Input Connector: XLR with loop through User Controls: Input Attenuator (0-16 dB) Selectable 80 Hz or 120 Hz Low Pass 80 Hz High-Pass enable/disable for XLR loop thru.
accessories	set	Cables Patch: XLR-XLR 10 pcs ( 4 x 10m + 6 x 1m)

Toate produsele sunt importate din SUA, 3 ani garantie!!!

Detalii tehnice:

DAS Event 210A Dual 10-Inch Powered Array Speaker

The Event 210A Line is a three-way powered line array in a double 10" "dual-band" configuration which provides a wider frequency range. The D.A.S. loudspeaker units has been teamed up with a single M-75 compression driver and purpose-designed injected aluminum high frequency waveguide. The Event 210A line array is powered by a three channel Class D amplifier which provides 360 Wpeak per channel. The amp's rear panel includes quality Neutrik XLR and powerCON connectors, status LEDS to facilitate setup and D.A.S.'s Easy-DSP interface which simplifies preset selection for the number of units and throw depth.

Features:

Powered 3-way system
Light-weight Class D amplifier topology
High-end DSP chipsets
Easy-DSP Interface
Quality Neutrik connectors
Top grade Birch cabinet construction
Durable ISO-flex finish
Robust "quick-rig" professional rigging hardware
Proprietary injected aluminium HF waveguide
D.A.S. M-75 compression driver and cone transducers

Specifications:

Nominal HF Amplifier Power: 360 Wpeak
Nominal MF Amplifier Power: 360 Wpeak
Nominal LF Amplifier Power: 360 Wpeak
Frequency Range (-10 dB): 70 Hz -20 kHz
Rated Peak SPL at 1 m: 134 dB
Horizontal Coverage (-6 dB): 90° Nominal
Vertical Coverage: Splay Dependent
Enclosure Material: Birch Plywood
Color/Finish: Black ISO-Flex Paint
Connectors: INPUT: Female XLR, LOOP THRU: Male XLR, AC INPUT: powerCON, AC OUTPUT: powerCON
AC Requirements: 115 V, 3.0A, 50 Hz/60 Hz, 230 V, 1.5A, 50 Hz/60 Hz
Dimensions (H x W x D): 27 x 73 x 36.6 cm (10.6 x 28.7 x 14.4 in)
Weight: 34 kg (74.8 lbs.)

JBL VRX-918-SP Powered 18 Flying Subwoofer

The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.

Features:

Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive® woofer for high-power capacity and light weight.
Integral rigging hardware for simple connection of enclosures and optional array frame.
20 mm threaded pole socket for solid, secure satellite speaker mounting.
Large port area for reduced distortion.

Specifications:

Power Rating : 1500 Watts Peak
LF: Dual-Bridged Technology™, Class D
Frequency Range: 31 Hz – 220 Hz
Dimensions (H x W x D): 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)
Frequency Response: 34 Hz – 220 Hz
Maximum Peak Output: 126 dB SPL at 1m
Bandpass Nominal Impedance: LF: 2 x 2 ohms LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil Differential Drive® woofer with neodymium-magnet
Audio Input Connector: XLR with loop through
User Controls: Input Attenuator (0-16 dB)
Selectable 80 Hz or 120 Hz Low Pass 80 Hz High-Pass enable/disable for XLR loop thru.
Signal Processing: DSP based, resident in Input Module
System Management: DSP based limiters for mechanical and thermal protection
AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz
AC Line Voltage: User selectable: 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
AC Current Requirements: 6A per system at 120V, 3A per system at 240V
Enclosure: 18 mm birch plywood.
Suspension / Mounting: Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
Finish: Black DuraFlex™ finish
Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
Net Weight: 38.5 kg (85 lb)
Optional Accessories: VRX-AF array frame
SRX718S-CVR: Pull-over padded cover (works with WK-4S)
SS4-BK adjustable satellite speaker pole WK-4S Caster kit