Meyer Sound Laboratories, Inc. - MSL-6

Producător: Meyer Sound
Cod produs: Meyer Sound Laboratories, Inc. - MSL-6
Disponibilitate: indisponibil momentan

0,00 RON TVA inclus

Pret: 0,00€
VAT Incl.

Descriere
Opinii (0)

Descriere

Meyer Sound Laboratories, Inc. - MSL-6. Acest echipament de sonorizare, autoamplificat, este dedicat aplicatiilor mari, cu spatii largi, tip stadion, concerte in aer liber, aeroporturi, piete, hale pentru concerte, sau sali de conferinte mari. Doua astfel de unitati alaturi de doua subwoofere 2 x 18" acopera fara probleme o arie cu un diametru de 250m indoor pentru un speech clar, iar pentru un concert in aer liber cantitatea este calculata in functie de perimetru.

Produs importat din SUA, 3 ani garantie!!! Pentru configurarea dorita, cotatia de pret si detalii privind livrarea sunati va rugam la magazin.

Prezentare si detalii tehnice:

Meyer Sound Laboratories, Inc. - MSL-6

Self-powered Loudspeaker

Series: Concert Series

Model: MSL-6

High-Q all-horn system affords concentrated, controlled coverage for long throws
Tight, full-range pattern control for ease in arraying
Very high peak output for large-scale applications
Ultra-low distortion assures clean sound reproduction

Designed specifically for very large-scale sound reinforcement, the self-powered Meyer Sound MSL-6 is ideally suited as a stand-alone system for vocal public address applications.For high-powered music reinforcement, it works in combination with Meyer Sound subwoofers and/or the DS-2P and DS-4P Horn-Loaded Mid-Bass loudspeakers.The MSL-6 contains two 12-inch low-frequency cone drivers and three high-frequency compression drivers in an arrayable, trapezoidal cabinet with integral electronics.The center and outer high-frequency horns utilize separate amplifiers and control electronics to achieve a 30-degree horizontal coverage angle.The MSL-6's 25-degree vertical coverage angle allows long-throw arrays of up to three vertical rows with minimal high-frequency overlap.An integrated, four-channel amplifier with complementary MOSFET output stages provides total peak power of 2480 watts (620 watts/channel, four channels).The MSL-6 features TruPower limiting, phase-corrected control electronics and an Intelligent AC power supply.The MSL-6's standard rigging hardware comprises 12 pivoting lift rings with a 5:1 safety factor.An internal steel framework carries all load stresses. An optional MRF-6 rigging frame allows integration of the MSL-6 into QuickFly systems.The MSL-6 is compatible with Meyer Sound's RMS remote monitoring system, which provides comprehensive monitoring of operating parameters over a Windows-based network.

High-Q all-horn system affords concentrated, controlled coverage for long throws
Tight, full-range pattern control for ease in arraying
Very high peak output for large-scale applications
Ultra-low distortion assures clean sound reproduction
Applications
Stadiums, arenas and concert halls
Speech and music reinforcement
Large-scale events
Depth : 819.91 mm
Depth : 32.28 in
Dynamic Range : >110 dB
Enclosure : 12-ply hardwood
Finish : black textured, charcoal grey carpet, or weather-protected
Height : 1085.85 mm
Height : 42.75 in
Impedance : 10000 ohm
Width : 1080.01 mm
Width : 42.52 in
Shipping Weight : 232.69 kg
Shipping Weight : 513 lbs 257 kg
AC Voltage : 235 Volts
Phase Response : ±30 degree 250 Hz – 12 kHz Measured at 3 non-axis, free field conditions, pink noise input, third-octave bands
Maximum SPL (Sound Pressure Level) : 145 dB
Automatic Voltage Selection : 95 – 125 V / 208 – 235 V; 50 Hz/60 Hz The unit is rated at 88-125V and 182-235V, 50/60 Hz, to satisfy EC standards for -10% to 6% AC line voltage
Transducers - Low Frequency : Two 12 inch diameter MS-12 cone (3 Inch voice coil)
Transducers - High Frequency : Three 2 Inch throat, 4 Inch diaphragm MS-2001A compression drivers
Audio Input - Connector : XLR (A-3) male and female
AC Power - Connector : 250 V NEMA L6-20P (twistlock) inlet or IEC 309 male inlet Other connectors available. For European installations, an IEC 309 connector 16A) can be installed
Protective Grill : Two-piece, damped, hex-punched metal screen, grey foam covering
Transducers - HF DC Protection : Three 20 mf capacitors
Transducers - Acoustical Crossover Range : 500 Hz – 1 kHz
Audio Input - Nominal Level : +4 dBu (1.23 Vrms)
Amplifier - Type : Complementary power MOSFET output stages class AB/H
Amplifier - Burst capability : 12480 Watts (620 Watts/channel) Nominal 8 resistive load, pink noise, 100 V peak
Amplifier - THD, IM, TIM : < .02 %
Operational Voltage Range - Turn on : 85 or 165 VAC 50/60 Hz
Operational Voltage Range - Turn off : 134 or 264 VAC 50/60 Hz
Max.Continuous RMS Current : 115 V: 14 A, 230 V: 7 A, 100 V: 16 A (>10 sec)
Burst RMS Current : 115 V: 26 A, 230 V: 13 A, 100 V: 30 A (<1 sec)
Max Peak Current During Burst : 115 V: 36 Apk, 230 V: 18 Apk, 100 V: 42 Apk
Soft-Current Turn-on Current : < 12 A at 115 V
Audio Input Type : 10 k ohms impedance, electronically balanced
Product Weight : 215.46 kg
Product Weight : 475 lbs
Coverage Horizontal : 30 degrees
Coverage Vertical : 25 degrees
Color : Black
Construction : Two-piece, damped, hex-punched metal screen, grey foam covering,12-ply hardwood
Minimum Frequency Response (Bandwidth) : 65 Hz
Minimum Frequency Response (Bandwidth) : 0.07 kHz
Maximum Frequency Response (Bandwidth) : 16000 Hz
Maximum Frequency Response (Bandwidth) : 16 kHz
Current Draw : 42 Amps