QSC KLA12 - KLA181 active line array SET

Producător: QSC
Cod produs: QSC KLA12 - KLA181 active line array SET
Disponibilitate: pre-comanda

63.360,00 RON TVA inclus

Pret: 12.418,56€
VAT Incl.

Descriere
Opinii (0)

Descriere

QSC KLA12 - KLA181 active line array SET se compune din 4 module active line-array QSC KLA12 si doua subwoofere active line-array QSC KLA181, sistemul avand o putere instalata de 4000 W RMS, respectiv 8000W in program, cu un maxim SPL pentru topuri de 131 dB si pentru sunwoofere de 135 dB. De remarcat DSP incorporat, protectie antitermica , EQ de maxima acuratete. In timp ce topurile detin 12" + driver 1,75", suburile sunt deservite de un difuzor de 18" de mare randament. Sistemul este importat numai cu pre-comanda din SUA si beneficiaza de o garantie de 3 ani!!! Upgradarea se face prin multiplicarea sistemului celula prezentat, care in configuratia aratata poate fi folosit fara probleme si la sonorizari indoor cu maxima eficienta. Sunetul este curat, placut si puternic. Datorita protectiei termale cu care toate amplificatoarele din sistem sunt dotate, fiabilitatea sistemului este foarte mare. Produs recomandat de stage-prolighting.

Detalii Tehnice:

The QSC KLA12 line array loudspeaker can be deployed in a fraction of the time required by comparable line array products with its simple "Lift, Click and Play" approach. This fixed arcuate, active line array speaker is ideal for a wide range of portable and permanently installed applications ranging from live entertainment, houses of worship or other venues where a line array system is desired.

The KLA12 features a highly efficient 500 watt by 500 watt power amp module. This efficient design enables up to 5 KLA models (any combination of KLA12 and KLA181) to be driven off of a single 15 amp, 120 volt electrical circuit.

KLA loudspeakers incorporate QSC's DEEP™ DSP algorithm, providing extended bass response by actively managing potentially damaging low-frequency transients - and GuardRail™ circuitry protection which prevents the amplifier module from unnatural and destructive clipping.

As an energy-saving feature, the Auto Standby mode automatically engages after five minutes of inactivity but upon resumption of audio signal, the power module on the KLA will awaken instantly for immediate output.

In an installed application, multiple KLA Series loudspeakers can be "daisy-chained" for total gain control from a single remote pot wired to the on-board Phoenix-style connector. Additional power module characteristics on KLA include a balanced, line-level XLR input in parallel with an XLR "Thru" connector, PowerCon™ In and Thru connectors, Attenuation Control and LED indicators for Signal, Limit, Power and Standby status.

Housed in a rugged ABS enclosure that results in both light weight and long-term durability, the KLA12 features a 12" low frequency transducer coupled with a 1.75" compression driver. Designed to be used exclusively as a fixed arcuate line array, each KLA12 is set at a 90° horizontal by 18° vertical splay angle, allowing 90° vertical coverage arrays to be configured using only 5 boxes (most other solutions require 6).

KLA's unique self-contained SOLO™ (Single-Operator Logistics) Rigging System enables users to quickly assemble (and disassemble) the line array in a fraction of the time without the need for special tools or external hardware.

The KLA12 Ar-Q™ (Arcuate Equalization) processing enables users to quickly tune the array, making appropriate frequency compensation adjustments based on the number of boxes. With the click of a dial, the user can select the total number of boxes deployed in the array resulting in an evenly balanced and accurate tonal curve. QSC's proprietary Intrinsic Correction™, first introduced with the WideLine™ Series, actively adjusts time, frequency and amplitude response to achieve a maximally flat bandpass target.

For maximum deployment flexibility, KLA loudspeakers can be either ground deployed or flown. As a ground stack, up to 2 KLA12 enclosures can be mounted over the KLA181 or the KW181 subwoofer via a threaded pole socket, or without a sub using an appropriately rated loudspeaker stand.

KLA12 enclosures also feature the Tilt-Direct™ 35mm pole socket allowing the loudspeaker to be aimed downward 9° for the best audience coverage.

Arrays of up to 480 lbs (218 kg) (with a maximum 5 KLA12 and 2 KLA181 enclosures) can be flown via the included M10 fittings or the optional KLA AF12 array frame.

QSC KLA12 Specifications:

Configuration: multipurpose 2-way
Transducers:
- HF: 1.75" diaphragm compression diver
- LF: 12" cone transducer
Frequency Response (-6 dB): 49Hz-18kHz
Frequency Range (-10 dB): 44Hz-20kHz
Nominal Coverage: 90°H x 18°V
Maximum SPL (1 meter): 131 dB peak
Amplifier:
Power Output:
- HF: 500W Class D continuous
- LF: 500W Class D continuous
Input Impedance (ohms): XLR: 40k balanced/20k unbalanced
Controls: Power, Attenuation, LF Setting (External Sub/Normal/Deep™), Array Size (1-5), Front LED (Pwr/Limit/Off)
Indicators: Power, Signal, Standby, Limit
Connectors: Balanced female XLR line level input, Balanced male XLR full-range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
Cooling: On demand, 50 mm variable speed fan
Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection: Thermal limiting, excursion limiting
AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption (1/8 Power):
100 VAC, 2.3 A
120 VAC, 2.01A
230 VAC, 1.13 A
Material: Impact-resistant ABS
Grille: Powder coated 18 gauge steel
Dimensions: 15" H x 23.4" W x 16.6" D (382 x 594 x 422 mm)
Net Weight: 55 lbs (25 kg)
Enclosure:

QSC KLA181 Features:

1,000 watt power module
18" vented subwoofer
High acoustic output (135 dB SPL peak)
Frequency range down to 33 Hz (-10 dB)
Extensive DSP further enhances and protects performance
powerCON® Input and Thru connections
Threaded pole-cup receptacle for free-standing applications
Suspension made possible via M10 fittings or KLA12AF Array Frame
Integrated threaded pole mount supports up to two KLA12 enclosures

QSC KLA181 Specifications:

Configuration: 18" subwoofer
Transducers: 18" cone transducer
Frequency Response (-6 dB): 38kHz
Frequency Range (-10 dB): 33kHz
Maximum SPL (1 meter): 135 dB peak
Amplifier:
- Power Output: 1000W Class D continuous
- Input Impedance (ohms): XLR: 40k balanced/20k unbalanced
- Controls: Power, Attenuation, LF Mode (Normal/Deep™), Polarity (Normal/Reverse), Front LED (Pwr/Limit/Off)
- Indicators: Power, Signal, Standby, Limit
- Connectors: Balanced female XLR line level input, Balanced male XLR full-range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
- Cooling: On demand, 50 mm variable speed fan
- Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
- Transducer Protection: Thermal limiting, excursion limiting
- AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz
- AC Power Consumption (1/8 Power):
  - 100 VAC, 2.3 A
  - 120 VAC, 2.01A
  - 230 VAC, 1.13 A
Enclosure:
Material: Painted birch plywood
Grille: Powder coated 16 gauge steel
Dimensions: 21.6" H x 23.1" W x 25.7" D (547 x 586 x 633 mm)
Net Weight: 100 lbs (45.3 kg)