Meyer Sound JM-1P Horizontal arrays

Producător: Meyer Sound
Cod produs: Meyer Sound JM-1P Horizontal arrays
Disponibilitate: pre-comanda

0,00 RON TVA inclus

Pret: 0,00€
VAT Incl.

Descriere
Opinii (0)

Descriere

Meyer Sound JM-1P Horizontal arrays este un modul line-array orizontal autoamplificat de mare randament avand urmatoarele caracteristici de baza:

Peak Power : 2250 Watt
15"/4"
Active Power : 1275 Watt
Coverage Horizontal : 20 degrees
Coverage Vertical : 60 degrees
Color : Black
Construction : Multi-ply hardwood, Hex-stamped steel with black mesh screen
Minimum Frequency Response (Bandwidth) : 53 Hz
Minimum Frequency Response (Bandwidth) : 0.05 kHz
Maximum Frequency Response (Bandwidth) : 18000 Hz
Maximum Frequency Response (Bandwidth) : 18 kHz
Current Draw : 21.60 Amps
Impedance (High Frequency) : 8 ohm
Impedance (Low Frequency) : 4 ohm
Power Handling (High Frequency) : 250 Watt
Power Handling (Low Frequency) : 1200 Watt
Frequency Response2 : 56 Hz – 16.5 kHz ±4 dB
Phase Response : 580 Hz – 16 kHz ±45°
Low Frequency : High-power 15" cone driver with neodymium magnet Nominal impedance: 2 ? Voice coil size: 4"
High Frequency : 4" compression driver Voice coil size: 4" Diaphragm size: 4", Exit size: 1.5"
Output Power6 : 1275 W (1 x 1000 W, 1 x 275 W)

Importul se face din SUA, numai cu precomanda. Garantia produsului este de 3 ani!!! Pentru detalii privind cotatia de pret, modalitatea si termenul de livrare, sunati va rugam la magazin.

Arrayable Loudspeaker

Series: JM Series

Applies modern technology to overcome historical point source array limitations
Tight-packing results in cleaner sightlines and neater appearance, and eliminates angle setting
Each JM-1P cabinet utilizes an REM and horn for precise 20° horizontal coverage in tight-packed arrays
Exceptional size-to-power ratio; easily powerful enough to use for main system, delay stacks, or fill duties
QuickFly rigging offers flexibility of both horizontal and vertical arrays, with option to fly or groundstack

No one can do every job with only a single tool, no matter how useful it is.In sound reinforcement, the vertical line array has found great popularity in recent years for a number of good reasons.But Meyer Sound looks further, so we built a line of great self-powered curvilinear array loudspeakers, and then turned our attention towards the other major tool in the live sound toolbox: horizontal arrays.The introduction of the JM series redefines point source systems and sets the new standard in the 21st century.The JM-1P arrayable loudspeaker combines Meyer Sound's famed clarity of sound and robust, self-powered performance with our latest breakthroughs in horn design, rigging and loudspeaker control to produce an extremely easy-to-use, highly versatile arrayable loudspeaker system powerful enough to act as a main system, but flexible enough to serve in any number of supporting roles whether horizontal or vertical, flown or stacked.With the level of performance and flexibility, the JM-1P is a wise investment that has a place in every job and on every tour.Meyer Sound defined the point source array with the classic UPA-1 in 1980, and the self-powered UPA-1P remains one of our top sellers today.With the tremendous technology advances of the last 12 years built into the JM-1P, we are redefining point source systems.The optional RMS remote monitoring system provides comprehensive monitoring of system parameters on a Windows-based computer.

Applies modern technology to overcome historical point source array limitations
Tight-packing results in cleaner sightlines and neater appearance, and eliminates angle setting
Each JM-1P cabinet utilizes an REM and horn for precise 20° horizontal coverage in tight-packed arrays
Exceptional size-to-power ratio; easily powerful enough to use for main system, delay stacks, or fill duties
QuickFly rigging offers flexibility of both horizontal and vertical arrays, with option to fly or groundstack
Consistent and predictable array performance ensures accurate system design
Applications
Theatres and theatrical sound reinforcement
Houses of worship
Portable and installed AV systems
Center and sidefill in large-scale systems
Concert Halls
Distributed systems in stadiums and theme parks
Nightclubs
Connectors : Female XLR input with male XLR loop output or VEAM all-in-one connector (integrates AC, audio, and network)
Depth : 737.36 mm
Depth : 29.03 in
Dynamic Range : >110 dB
Height : 916.43 mm
Height : 36.08 in
Impedance : 10000 ohm
Type : Differential, electronically balanced
Width : 426.47 mm
Width : 16.79 in
Input Level : Audio source must be capable of producing +20 dBV (10 V rms, 14 V peak) into 600 ? in order to produce maximum peak SPL over the operating bandwidth of the loudspeaker
AC Voltage : 264 Volts
Wiring : Pin 1: Chassis/earth through 220 k?, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies Pin 2: Signal + Pin 3: Signal – Case: Earth ground and chassis
CMRR : >50 dB, typically 80 dB (50 Hz – 500 Hz)
Maximum SPL (Sound Pressure Level) : 138 dB
Maximum Common Mode Range : ±15 V DC, clamped to earth for voltage transient protection
DC Blocking : Differential DC blocking up to the maximum common mode voltage
RF Filter : Common mode: 425 kHz; Differential mode: 142 kHz
TIM Filter : Integral to signal processing (<80 kHz)
THD, IM, TIM : <.02%
Nominal Input Sensitivity : 0 dBV (1.0 V rms, 1.4 V peak) continuous is typically the onset of limiting for noise and music
Product Weight : 66.68 kg
Product Weight : 147 lbs
Peak Power : 2250 Watt
Active Power : 1275 Watt
Coverage Horizontal : 20 degrees
Coverage Vertical : 60 degrees
Color : Black
Construction : Multi-ply hardwood, Hex-stamped steel with black mesh screen
Minimum Frequency Response (Bandwidth) : 53 Hz
Minimum Frequency Response (Bandwidth) : 0.05 kHz
Maximum Frequency Response (Bandwidth) : 18000 Hz
Maximum Frequency Response (Bandwidth) : 18 kHz
Current Draw : 21.60 Amps
Impedance (High Frequency) : 8 ohm
Impedance (Low Frequency) : 4 ohm
Power Handling (High Frequency) : 250 Watt
Power Handling (Low Frequency) : 1200 Watt
Frequency Response2 : 56 Hz – 16.5 kHz ±4 dB
Phase Response : 580 Hz – 16 kHz ±45°
Low Frequency : High-power 15" cone driver with neodymium magnet Nominal impedance: 2 ? Voice coil size: 4"
High Frequency : 4" compression driver Voice coil size: 4" Diaphragm size: 4", Exit size: 1.5"
Output Power6 : 1275 W (1 x 1000 W, 1 x 275 W)