USED d&b audiotechnik Q10-C7-C7Sub-D12 SET
Cod produs: USED d&b audiotechnik Q10-C7-C7Sub-D12 SET
Disponibilitate: disponibil in 8-10 zile
VAT Incl.
Descriere
USED d&b audiotechnik Q10-C7-C7Sub-D12 SET se compune din:
| Component | Buc | Descriere sumara | ||||||||||||
|
C7 subwoofer |
4 |
|
||||||||||||
|
C7-TOP loudspeaker |
2 |
|
||||||||||||
|
D12 amplifier |
2 |
|
||||||||||||
|
Q10 loudspeaker |
2 |
|
||||||||||||
| Case for 2 x Q10, and cables | set | Hard case & cables |
Setul este importat din UK, plata anticipat, se ofera garantie 6 luni, este in stare tehnica excelenta, estetic arata ca in imaginile reale prezentate.
Detalii tehnice produse:
2 x C7 Tops & 4x C7 Subs with Ep5 connectors.
The tops come with lids.
Listing is for loudspeakers only.
Cleaned and maintained by in house technicians.
C7 subwoofer
The C7-SUB is a bass-reflex subwoofer specifically designed for use with the C7-TOP providing dynamic performance with high impulse program, a tight full sound and high efficiency. Its extra large bass-reflex tunnel guarantees high sound pressure while minimizing power compression and air turbulence noise. The C7-SUB cabinet is constructed from marine plywood and has an impact resistant paint finish, steel handles and an M20 threaded flange on the top to accept a loudspeaker stand. The front of the subwoofer cabinet is fitted with catches at the top and bottom for securing an optional wooden lid, and mounted on the rear panel are ratchet strap guide plates, two hinge plates and four heavy duty wheels.
Data
|
Components |
18" driver |
|
Max. sound pressure (1m, free field)1 |
|
|
Power handling capacity (RMS/peak 10 ms) |
400/1200 W |
|
Frequency response (-5 dB) |
44 Hz - 140/100 Hz2 |
|
Cabinets per channel D6/D12/D20/D80 |
2 |
|
Dimensions mm (H x W x D) |
740 x 580 x 6203 |
|
Weight kg |
49 |
|
Dimensions inch (H x W x D) |
29.1 x 22.8 x 24.43 |
|
Weight lb |
108 |
C7-TOP loudspeaker
The C7-TOP is a 2-way horn loaded loudspeaker that exhibits true constant directivity above a frequency of 600 Hz, ensuring equal sound within the coverage area. The bass-reflex design of the low end allows the C7-TOP to be used without a subwoofer, and with its medium to high sound pressure levels and extended directivity it is ideal for balcony or stadium sound reinforcement, delay and background music playback. Where a more powerful PA system is required a C7-TOP can be stacked with two C7-SUBs. The C7-TOP cabinet is constructed from marine plywood, has an impact resistant paint finish, steel handles and MAN CF4 stud plate rigging points. The front of the loudspeaker cabinet is fitted with catches at the top and bottom for securing an optional wooden lid, and mounted on the rear panel are ratchet strap guide plates, two hinge plates and four heavy duty wheels.
Data
|
Components |
15" driver/1.5" compression driver |
|
Max. sound pressure (1m, free field)1 |
|
|
Power handling capacity (RMS/peak 10 ms) |
200/800 W |
|
Frequency response (-5 dB) |
68 Hz - 18 kHz |
|
Nominal dispersion angle (h x v) |
75° x 40° CD2 |
|
Cabinets per channel D6/D12/D20/D80 |
2 |
|
Dimensions mm (H x W x D) |
580 x 580 x 6203 |
|
Weight kg |
52 |
|
Dimensions inch (H x W x D) |
22.8 x 22.8 x 24.43 |
|
Weight lb |
115 |
D12 amplifier
The 3 RU two channel D12 amplifier delivers medium to high power into low impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments. The D12 contains setups for all d&b loudspeakers and a linear mode. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D12 incorporates a digital rotary encoder and a LCD display to configure the amplifier.
The D12 utilizes an autosensing switch mode power supply for mains voltages 120 V/230 V, 50 - 60 Hz (optional 100/200V). The D12 amplifier incorporates d&b SenseDrive for accurate control of LF drivers in d&b loudspeakers driven in 2-Way Active mode or in actively driven d&b subwoofers. When the D12 is fitted with EP5 connectors and appropriate 5 wire cabling, d&b SenseDrive can be used, resulting in an extremely precise bass performance even at high levels. NL4 and NL8 connector options are also available. RJ 45 connectors enable access to the Remote network via CAN-Bus. d&b System check verifies that the system performs within a predefined condition, whilst d&b Load monitoring enables an automatic and continuous impedance monitoring. Both can determine the status of an LF or HF driver in systems with multiple elements, even if these are crossed over passively.
Data
|
Control and indicators |
|||
|---|---|---|---|
|
POWER |
Mains power switch |
||
|
SCROLL/EDIT |
Digital rotary encoder |
||
|
Display |
Liquid Crystal Display (LCD)/120 x 32 pixel |
||
|
ISP, GR, OVL A/B |
LED indicators |
||
|
Digitial Signal Processing |
|||
|
Equalizer |
4-band PEQ/Notch |
||
|
Latency analog and digital inputs |
0.3 msec. |
||
|
Delay setting |
0.3 - 340 msec. with 0.1 msec. detents |
||
|
Configurations |
current d&b loudspeakers and linear mode |
||
|
Function switches |
d&b loudspeaker specific circuits |
||
|
Frequency generator |
Pink noise or Sine wave |
||
|
Sampling rate |
96 kHz/27 Bit ADC/24 Bit DAC |
||
|
Connectors |
|||
|---|---|---|---|
|
INPUT ANALOG (A1, A2) |
3 pin XLR female |
||
|
ANALOG LINK (A1, A2) |
3 pin XLR male |
||
|
INPUT DIGITAL (D1, D2) |
3 pin XLR female AES 3 |
||
|
DIGITAL LINK (Output) |
3 pin XLR male |
||
|
Sampling rate |
48 kHz/96 kHz |
||
|
OUT CHANNEL A/B |
NL4 |
||
|
REMOTE |
2 x RJ 45 parallel, CAN-Bus |
||
|
SERVICE |
SUB-D9 female |
||
|
Mains connector |
powerCON® 1 |
||
|
Data (linear setting with subsonic filter) |
|||
|
Rated output power (THD + N < 0.5%, both channels driven) |
|
||
|
S/N ratio (unweighted, RMS) |
> 110 dBr |
||
Q10 loudspeaker
The Q10 is a 110° x 40° passive 2-way loudspeaker housing two 10" LF drivers and a 1.3" HF compression driver with a rotatable constant directivity horn and a passive crossover network. The two 10" neodymium LF drivers are positioned in a dipolar arrangement providing exceptional vertical dispersion control with the nominal angle being maintained down to 400 Hz. The Q10 can be used as a stand-alone full range system or in combination with other Q-Series cabinets ground stacked or mounted on a high stand with the Q Flying bracket. When used in the upright configuration it has a very accurate 110° horizontal constant directivity behaviour that is maintained down to approximately 800 Hz. Its wide constant directivity performance provides remarkable transparency when used in close proximity to listeners. It is also ideally suited to ambient and / or distributed sound reinforcement tasks where orientation within the sound field is critical. The Q10 cabinet is constructed from marine plywood and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill, covered with a replaceable acoustically transparent foam. The cabinet incorporates a pair of handles and mounted on the rear panel are two EP5 or NL4 connectors wired in parallel.
Data
|
Components |
2 x 10" driver/1.3" compression driver |
|
Max. sound pressure (1m, free field)1 |
|
|
Power handling capacity (RMS/peak 10 ms) |
400/1600 W |
|
Frequency response (-5 dB) |
60/1002 Hz - 17 kHz |
|
Nominal dispersion angle (h x v) |
110° x 40°34 CD |
|
Cabinets per channel D6/D12/D20/D80 |
2 |
|
Dimensions mm (H x W x D) |
580 x 308 x 410 |
|
Weight kg |
22 |
|
Dimensions inch (H x W x D) |
22.8 x 12.1 x 16.1 |
|
Weight lb |
49 |
Opinii (0)
Spune-ţi opinia
Numele tău:Opinia ta: Notă: Codul HTML este citit ca şi text!
Nota: Rău Bun
Introduceţi codul din imagine:
 d&b audiotechnik E12 SET-280x280.jpg)
