d&b indoor PA sys I SET este un sistem PA proiectat pentru aplicatii indoor. Avand 4000 W RMS, gratie suberbului amplificator D20 cu DSP incorporat dedicat procesarii d&b speakers se obtine un sunet de o claritate exceptionala in toata banda de frecvente.

Import Germania, 3 ani garantie!!! Pentru detalii privind pretul si modalitatea de livrare, va rugam sunati la magazin.

Sistemul dvs va contine:

Component	Nr buc	Descriere sumara
V10P loudspeaker	2	top, wide dispersion
12S-D loudspeaker	2	top, wide H dispersion
D20 amplifier	1	4-ch amplifier si procesor de sistem
27S subwoofer	2	sub 12" +15"
18S subwoofer	2	sub 18"
Rigging sys + cables	SET	sistem de prindere topuri si cabluri 4-pole speakon SET

 Detalii tehnice:

 V10P loudspeaker

The 3-way passive V10P loudspeaker features two 10“ drivers in a dipole arrangement with a horn loaded 8“ MF driver and a 1.4“ compression driver mounted onto a rotatable CD horn. The innovative horn design for the centrally mounted 8“ MF driver produces a remarkable sensitivity resulting in an exceptional performance in the vocal range. An advanced bass-reflex and venting design delivers an extended LF output with full bandwidth capabilities. All components are arranged symmetrically around the centre axis of the cabinet to produce a perfect symmetrical dispersion pattern. Due to the dipolar arrangement of the LF drivers, broadband dispersion control is maintained down to approximately 350 Hz in the same plane as the dipole.

This point source, high performance loudspeaker offers 110° horizontal directivity matched with a vertical dispersion of 40°; the horn can be rotated by 90° to enable horizontal orientation. The V10P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the V-Series, either ground stacked or flown.

The loudspeaker cabinet is constructed from marine plywood, and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. The V10P cabinet incorporates a pair of handles. M10 threaded inserts are provided for attaching d&b rigging hardware. Additionally, three further M10 sockets accept the 8mm load pin to expand the mounting options.

Data

Dimensions, weight
Dimensions (H x W x D)	700 x 308 x 466 mm 27.5 x 12 x 18.3"
Weight	33 kg

12S-D loudspeaker

The biaxial 12S/12S-D are high performance 2-way loudspeakers that house a single 12” driver in a bass-reflex enclosure and different HF sections for a wide range of installed sound applications. Both versions are lightweight passive designs using neodymium drivers and large horns for accurate pattern control with rotatable dispersion characteristics of 75° x 50° and 110° x 55° respectively. Both loudspeakers are equipped with a 1.4” exit compression driver. With their extended frequency response from 48 Hz to 18 kHz both versions can be used as full range systems and can also be supplemented by different subwoofers of the xS-Series. The enclosure is constructed from marine plywood with an impact resistant black paint finish and is Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The top and bottom panels incorporate a pair of M10 threaded inserts and the rear panel incorporates two M8 threaded inserts, two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP34 rating, and enables operation of loudspeakers in changing ambient conditions.

System data
Frequency response (–5 dB standard)		48 Hz - 18 kHz
Frequency response (–5 dB CUT mode)		100 Hz - 18 kHz
Max. sound pressure (1m, free field)1 with D6/10D with D20/30D with D80		130 dB 133 dB 133 dB
Cabinets per amplifier channel		2
Loudspeaker data
Configuration	Installation specific high performance 2-way loudspeaker with wide dispersion
Nominal impedance	8 Ω
Power handling capacity (RMS/peak 10 ms)	300/1600 W
Nominal dispersion angle (h x v)	110° x 55° rotatable
Components	12" driver with neodymium magnet 1.4" compression driver with CD horn passive crossover network
Connections	2 x NL4 screw terminal block

Dimensions, weight
Dimensions (H x W x D)	638 x 338 x 365 mm 25.1 x 13.3 x 14.4"
Weight	17 kg

D20 amplifier

The 2 RU four channel D20 amplifier is ideally suited to mobile and installation applications which require low to medium Sound Pressure Level (SPL) capabilities. The D20 features the same Digital Signal Processing (DSP) platform as the latest generation of d&b amplifiers, containing configurations for all d&b loudspeakers except the J-Series and the M2 monitor, plus a linear mode.

The signal delay capability enables user definable settings of up to 10 s (= 3440 m/11286 ft), which can be applied independently to each channel. The same applies to the two 16-band equalizers, providing optional parametric, asymmetric, shelving or notch filtering.

The D20 incorporates a colour TFT touchscreen, offering quick access to the menu structure, while the rotary encoder can be used for fine adjustment. The front panel and the integrated touchscreen are tilted up for easy operation when the amplifier is below eye level.

The equal ratio of signal input to amplifier output channels increases application flexibility particularly for monitor, frontfill or effect channel use. The LoadMatch function integrated within the D20 amplifier electrically compensates for the properties of loudspeaker cable used.

The D20 incorporates Class D amplifiers utilizing a power supply with active Power Factor Correction (PFC) suitable for mains voltages 100 V - 240 V, 50 - 60 Hz and maintains a stable output when used with weak or unstable mains supplies. An NL8 provides all outputs on a single connector for loudspeaker multicores. Dual channel mode is driven through four individual NL4 connectors, while Mix TOP/SUB and 2-Way Active mode output configurations for applicable d&b loudspeakers are available via two central NL4 connectors. etherCON and RJ 45 connectors enable access to the d&b Remote network through OCA via Ethernet and through CAN-Bus respectively.

Data

Controls and indicators
POWER	Mains power switch
SCROLL/EDIT	Digital rotary encoder
Display	Colour TFT touchscreen, 3.5"/320 x 240 pixel
ISP, GR, OVL A/B	Colour TFT
Digital Signal Processing
Equalizer		2 x 16-band PEQ/notch/shelving/asymmetric
Latency analog and digital inputs		0.3 msec.
Delay setting		0.3 - 10000 msec.
Configurations		current d&b loudspeakers (except J-Series and M2 monitor) and linear mode
Function switches		d&b loudspeaker specific circuits
Frequency generator		Pink noise or Sine wave
Sampling rate		96 kHz/27 Bit ADC/24 Bit DA

Connectors
INPUT ANALOG (A1 - A4)	3 pin XLR female
ANALOG LINK (A1 - A4)	3 pin XLR male
INPUT DIGITAL (D1/2, D3/4)	3 pin XLR female AES 3
DIGITAL LINK (Output)	3 pin XLR male
Sampling Digital AES/EBU	48 kHz/96 kHz
Speaker outputs A/B/C/D	NL4
Mix TOP/SUB / 2-Way Active output A/B and C/D	NL4
4 Channel output	NL8
CAN	2 x RJ 45 parallel
ETHERNET	2 x etherCON®, 10/100 Mbit Ethernet
Mains connector	powerCON®
Data (linear setting with subsonic filter)
Maximum output power per channel (THD + N < 0.5%, all channels driven) CF = 6 dB at 4 / 8 ohms CF = 12 dB at 4 / 8 ohms		4 x 1000/800 W 4 x 1600/800 W
S/N ratio (unweighted, RMS) Analog input Digital input		> 104 dBr > 106 dBr

Power supply
Type	Universal range switch mode power supply with active PFC
Rated mains voltage	100 - 240 V, 50 - 60 Hz
Dimensions, weight
Dimensions (H x W x D)		2 RU x 19" x 460 mm/18.1"
Weight		10.8 kg/23.8 lb

27S subwoofer

The 27S-SUB is a compact high performance cardioid subwoofer powered by a single amplifier channel and is for use with the xS-Series and xA-Series loudspeakers. The cabinet houses two long excursion neodymium drivers in an integrated cardioid setup: a 15“ driver in a bass-reflex design facing to the front and a 12” driver in a two chamber bandpass design radiating to the rear. It can be used stand-alone, stacked or individually flown. The enclosure is constructed from marine plywood with an impact resistant black paint finish and is Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Incorporated into the side panels are a pair of M10 threaded inserts and into the rear panel are two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP34 rating, and enables operation of loudspeakers in changing ambient conditions.

 

System data
Frequency response (–5 dB standard)	40 - 140 Hz
Frequency response (-5 dB 100 Hz mode)	40 - 100 Hz
Max. sound pressure (1m, free field)1 with D6/10D with D20/30D with D80	128 dB 131 dB 131 dB
Cabinets per amplifier channel	2
Loudspeaker data
Configuration		Installation specific cardioid subwoofer
Nominal impedance		6 Ω
Power handling capacity (RMS/peak 10 ms)		500/2000 W
Components		15" driver with neodymium magnet front 12" driver with neodymium magnet rear
Connections		2 x NL4 screw terminal block

 

Dimensions, weight
Dimensions (H x W x D)	490 x 580 x 700 mm 19.3 x 22.8 x 27.6"
Weight	41 kg

18S subwoofer

The 18S-SUB is a compact high performance subwoofer for use with the xS-Series and xA-Series loudspeakers. The cabinet houses a long excursion 18" neodymium driver in a bass-reflex design and it can be used stand-alone, stacked or individually flown. The enclosure is constructed from marine plywood with an impact resistant black paint finish and is Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Incorporated into the side panels are a pair of M10 threaded inserts and into the rear panel are two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP34 rating, and enables operation of loudspeakers in changing ambient conditions.

 

System data
Frequency response (–5 dB standard)	37 - 140 Hz
Frequency response (-5 dB 100 Hz mode)	37 - 100 Hz
Max. sound pressure (1m, free field)1 with D6/10D with D20/30D with D80	129 dB 132 dB 132 dB
Cabinets per amplifier channel	2
Loudspeaker data
Configuration		Installation specific compact subwoofer
Nominal impedance		8 Ω
Power handling capacity (RMS/peak 10 ms)		400/1600 W
Components		18" driver with neodymium magnet
Connections		2 x NL4 screw terminal block

 

Dimensions, weight
Dimensions (H x W x D)	490 x 580 x 700 mm 19.3 x 22.8 x 27.6"
Weight	32 kg

 

Spune-ţi opinia

Numele tău:
Opinia ta: Notă: Codul HTML este citit ca şi text!

Nota: Rău           Bun

Introduceţi codul din imagine: